CAE Air1 Скачать руководство пользователя страница 123

Страница: 123 / 158

Care and Maintenance

118

CAE

Air1

The Settings screen will appear and the Administrator settings default to locked.

Settings Screen - Administrator Settings Locked

A passcode is required to access the features in this part of the screen.

3. To unlock this part of the Settings screen, select the

Locked

button. A passcode screen

opens.

Enter Passcode Screen

4. Using the numeric keypad, enter the correct passcode to unlock the Administrator

Settings.

The default passcode is 00000. Once unlocked, the technician can modify the passcode.

There is no way to reset passcode. If the passcode is forgotten, the SD (Secure Digital) card

will required re-flashing (files recopied).

With the Administrator Setting unlocked, the passcode

Change

button and the software

Network

button become available.

Содержание Air1































































































































































Результаты поиска

Содержание Air1

Отзывы:

CAE Air1, Руководство пользователя, Страница: 123 / 158

Результаты поиска

Содержание Air1

Отзывы: