CAE Air1 Скачать руководство пользователя страница 115

Страница: 115 / 158

Care and Maintenance

110

CAE

Air1

Preventive Maintenance

The ventilator is designed to operate with minimal scheduled maintenance

For additional information on any maintenance-related topics, refer to the

CAE Air1 Service Manual

Consumable Materials

Consumable materials are used by both the ventilator operator and by service personnel.

Note:

The breathing circuit tubing and filters are not supplied by CAE.

Operator Consumable Materials

The following table lists materials that are most often used by the ventilator operator.

Note:

Asterisk (*) indicates item under warranty.

Note:

The breathing circuit filters should have a low resistance value. If the resistance is too high, the

Breathing Circuit Characterization Test will fail.

Operator Consumable Materials

Description

CAE Part Number or Recommended Part

Room Air Inlet Filter*

PS380352045295

Oxygen hose

PS585475035298

Breathing Circuit

• BOMImed OL-638036-95
• Fisher & Paykel RT 210
• Fisher & Paykel RT 380
• Or equivalent

Inspiratory Filter (HEPA)

• BOMimed BOM-040421-00
• Or equivalent

Expiratory Filter (HME)

• BOMimed BOM-040424-00
• Or equivalent

Содержание Air1































































































































































Результаты поиска

Содержание Air1

Отзывы:

CAE Air1, Руководство пользователя, Страница: 115 / 158

Результаты поиска

Содержание Air1

Отзывы: