CAE Air1 Скачать руководство пользователя страница 13

Страница: 13 / 158

Safety

CAE

Air1

Cleaning

•

WARNING:

Use and follow CAE recommended cleaning and disinfecting products and

procedures. Non-compatible products or methods may cause damage to the enclosure or

display screen causing ventilator malfunction. Infection may occur from use of a dirty or

contaminated ventilator.

•

WARNING:

Do not perform any cleaning or disinfecting while a patient is connected to the

CAE Air1 ventilator.

•

WARNING:

Follow all cleaning and disinfecting instructions. Chemical toxicity and injury

may occur from exposure to chemicals in cleaning and disinfecting agents.

•

WARNING:

Before placing in storage, the ventilator must be cleaned and disinfected.

Cover the ventilator and plug all ports (supplied with the ventilator) to prevent dust or

insects from entering through ventilator connectors.

Gas

•

WARNING:

The CAE Air1 ventilator is not for use with unapproved or unspecified inlet

gases, including nitric oxide.

•

WARNING:

Do not use the ventilator with flammable anesthetic or other gases than air

and medical grade O

substances. Fire and burns may occur.

•

WARNING:

Setup and use ventilator with caution. Burns may result from release of

pressurized gas. Gas tanks that fall may break at release valve and cause release of gas.

Содержание Air1































































































































































Результаты поиска

Содержание Air1

Отзывы:

CAE Air1, Руководство пользователя, Страница: 13 / 158

Результаты поиска

Содержание Air1

Отзывы: