CAE Air1 Скачать руководство пользователя страница 20

Страница: 20 / 158

Safety

Ergonomics

• Viewing a display screen for an extended period of time may result in eye strain.

Operations

• This equipment is not intended for use in residential environments and may not provide

adequate protection to radio reception in such environments.

• Follow manufacturer’s instructions for nebulizers, humidifiers, and pressurized oxygen

supply.

• Be aware when maneuvering the ventilator, avoiding obstacles and surfaces that may

cause damage to the ventilator enclosure.

• Avoid spilling fluids from the ventilator or it’s accessories. Falling may occur due to

slipping on spilled fluids.

• Always lock the caster wheels of the ventilator to ensure proper orientation of console

display and buttons. Equipment misuse and ergonomic related injuries may result from

improper setup of the ventilator.

Содержание Air1































































































































































Результаты поиска

Содержание Air1

Отзывы:

CAE Air1, Руководство пользователя, Страница: 20 / 158

Результаты поиска

Содержание Air1

Отзывы: