CAE Air1, Руководство пользователя, Страница: 136 / 158

©2020 CAE 905K710052 v.1.1 131
Appendix B - Alarms
A
PPENDIX
B - A
LARMS
The CAE Air1 ventilator is equipped with visual and audible alarm systems. LED indications on the
ventilator case and alarm banners on the touchscreen are accompanied by audible alarm signals with
matching priority alert levels. The LED provides a visual indication of the ventilator status, visible to
medical staff from a distance. The on-screen computer display widgets provide a detailed status of
each sensor, a list of active alarms, and an alarm history log is recorded. The audible alarms act as
attention getters to ensure medical personnel are immediately alerted to any issue.
For information on setting alarm threshold values, refer to the Interface Overview section.
Vitals Sensor Alarms
The following table identifies the vitals alarm indications that may occur. For vitals sensors, an alarm
will be triggered when the ventilator readings cross the minimum or maximum threshold value.
Note: It is possible for multiple alarms to be active at the same time
Note: The alarm name appears on the touchscreen as an alarm banner when that alarm condition
occurs. See Alarm Indications for additional information.
SAFETY NOTICE
Prior to handling or using the CAE Air1 ventilator, all warnings and cautions must be
read and understood. See the
Safety section of this user guide for a comprehensive list.
Alarm Priority Indication Description
Apnea
High Visible and
audible alert
Alarm threshold is exceeded.
FiO
2
High/Low
High Visible and
audible alert
Measured FiO
2
value is above or below the
set max/min threshold.
Ppeak High/Low
High Visible and
audible alert
Measured Ppeak value is above or below
the set max/min threshold.
MVe High/Low
High Visible and
audible alert
Measured MVe value is above or below the
set max/min threshold.
RR Total High/Low
High Visible and
audible alert
Measured RR value is above or below the
set max/min threshold.
PEEP High/Low
High Visible and
audible alert
Measured PEEP value is above or below the
set max/min threshold.
VTe High/Low
High Visible and
audible alert
Measured VTe value is above or below the
set max/min threshold.