Brother PE-Design Next, Инструкция по эксплуатации

Страница: 88 / 320

86
Specifying the Design Page Size and Color
Specifying a user hoop size
(1) Width , Height :
Type in the size of the hoop to be added.
(2) Comment :
If text was entered in this box, that text
appears beside the size.
(3) Add Hoop :
Click this button to add the hoop size.
(4) User Hoop List :
The added hoop size appears in the list.
Select a hoop size in this list to change the
display order or to delete it.
(5) Up , Down :
Click these buttons to move the selected
hoop size up or down in the display order.
(6) Delete Hoop :
Click this button to delete the selected
hoop size.
Specifying the sewing area
The sewing area can be specified.
Click 1 .
Select the desired sewing area ( Design Page area
or Use existing design area ).
Design Page area : The patterns will be sewn
so that the needle position when you start
sewing is aligned with the center of your
Design Page.
Use existing design area : The patterns will
be sewn so that the needle position when you
start sewing is aligned with the center of the
actual patterns.
a
Note:
• A User Hoop cannot rotate 90°.
• A User Hoop cannot be added to the
Section Size (for Hoop Size) selector
under Custom Size.
• Do not create a Custom Hoop larger than
the embroidery hoop that can be used with
your machine.
• Embroidery data created in a User Hoop
cannot be saved in a format for a previous
version.
(1)
(4)
(5)
(6)
(3)
(2)
b
Memo:
When Design Page area is selected, the
dimension of the pattern matches the size of
the Design Page, therefore reducing the
ability to move a pattern around the layout
screen of your embroidering machine.
b
Memo:
When Use existing design area is selected,
the actual pattern size is maintained, therefore
allowing greater mobility when using the layout
functions of your embroidering machine.
1
XE8656-001.book Page 86 Monday, May 24, 2010 5:44 PM