Brother PE-Design Next, Инструкция по эксплуатации

Страница: 261 / 320

259
Fo
nt Crea
to
r
Creating a Font Character Pattern
Editing Font Character
Patterns
■
Selecting patterns
1.
To use the Select tool, click 1 , then 2 .
2.
Click the pattern.
3.
To select an additional pattern, hold down the
key and click the other pattern.
■
Moving patterns
Selected patterns can be dragged to move them.
■
Scaling patterns
Drag a handle of the selected pattern to adjust its
size. Drag the rotation handle to rotate the pattern.
b
Memo:
• You can also select patterns by dragging the
pointer across the pattern.
• Hold down the key and click a
selected pattern to deselect it.
b
Memo:
• To move the pattern horizontally or
vertically, hold down the key while
dragging it.
• Pressing the arrow keys moves the selected
pattern one grid mark in the direction of the
arrow on the key. If the grid is not displayed,
the pattern moves a distance smaller than
the smallest grid interval in the direction of
the arrow on the key.
1
2
Rotation handle
Handles
Ctrl
Ctrl
Shift
b
Memo:
• If the key is held down while a
handle is dragged, the pattern is enlarged
or reduced from the center of the pattern.
• To flip the selected pattern(s) up/down, click
1 , then 2 , then Flip Vertically (3) .
To flip the selected pattern(s) left/right, click
1 , then 2 , then Flip Horizontally (4) .
• Using commands other than those
mentioned above, selected patterns can be
edited in other ways, for example,
duplicated or deleted.
c
“Menus/Tools” of “Font Creator”
on page 291.
Shift
1
2
3
4
XE8656-001.book Page 259 Monday, May 24, 2010 5:44 PM