Brother PE-Design Next Скачать руководство пользователя страница 148

Страница: 148 / 320

146

Tutorial 7: Print and Stitch

Step 4

Embroidering

If an iron-on transfer sheet is used, transfer
the image onto fabric.

Hoop the fabric in the embroidery frame.

Place the positioning sheet on the fabric to be
embroidered so that it is aligned with the
printed image.

• If the positioning sheet is too large, cut it to

an appropriate size so it can easily be used
for aligning the positions.

• Tape the positioning sheet to the fabric to

secure it in place.

Attach the embroidery frame to the
embroidery machine.

Be sure that the positioning sheet does not
move out of place.

Align the needle with the mark at the center of
the positioning sheet.

• If the embroidery machine has a built-in

camera, press the start positioning button
to detect the positioning mark and
automatically align the embroidering
position.

• With other embroidery machines, manually

align the positions.

After positioning is finished, remove the
positioning sheet from the fabric.

Start the embroidery machine to embroider
the pattern.

Memo:

For details on transferring from iron-on
transfer sheets, refer to the instructions for the
iron-on transfer sheets.

Memo:

• For details on using the embroidery

machine, refer to the Operation Manual
included with the machine.

• Six patterns of completed samples for Print

and Stitch are provided in the following
folder.

Documents

(

My Documents

PE-DESIGN NEXT\Sample

Layout &

Editing

Print and Stitch

XE8656-001.book Page 146 Monday, May 24, 2010 5:44 PM

Содержание PE-Design Next

































































































































































































































































































































Результаты поиска

Содержание PE-Design Next

Отзывы:

Похожие инструкции для PE-Design Next

Бренды по названию

Популярные бренды

Brother PE-Design Next, Инструкция по эксплуатации

Результаты поиска

Содержание PE-Design Next

Отзывы:

Похожие инструкции для PE-Design Next

Бренды по названию

Популярные бренды