Brocade Communications Systems 53-1001763-02, Руководство администратора

Страница: 532 / 586

492 Fabric OS Administrator’s Guide
53-1001763-02
FC-FC Routing and Virtual Fabrics
21
LSAN Devices: 10000 51
Proxy Device Slots: 10000 20
WWN Pool Size Allocated
---------------------------------
Phantom Node WWN: 8192 5413
Phantom Port WWN: 32768 16121
Port Limits:
Max proxy devices:
2000
Max NR_Ports: 1000
Currently Used(column 1: proxy, column 2: NR_Ports):
0 | 0 34
1 | 3 34
4 | 0 0
5 | 0 0
6 | 0 0
7 | 0 0
8 | 6 34
9 | 6 34
10 | 6 34
11 | 6 34
12 | 6 34
13 | 6 34
14 | 6 34
15 | 6 34
16 | 8 34
17 | 8 34
18 | 8 34
19 | 8 34
20 | 8 34
21 | 8 34
22 | 8 34
23 | 8 34
FC-FC Routing and Virtual Fabrics
If Virtual Fabrics is not enabled, FC-FC routing behavior is unchanged. If Virtual Fabrics is enabled,
then in the FC-FC routing context, a base switch is like a backbone switch and a base fabric is like a
backbone fabric.
If Virtual Fabrics is enabled, the following rules apply:
•
EX_Ports and VEX_Ports can be configured only on the base switch.
When you enable Virtual Fabrics, the chassis is automatically rebooted. When the switch
comes up, only one default logical switch is present, with the default fabric ID (FID) of 128. All
previously configured EX_Ports and VEX_Ports are persistently disabled with the reason
“ExPort in non base switch”. You must explicitly create a base switch, move the EX_ and
VEX_Ports to the base switch, and then enable the ports.
If you move existing EX_ or VEX_Ports to any logical switch other than the base switch, these
ports are automatically disabled.
If you want to change an EX_ or VEX_Port on the logical switch to be a non-EX or VEX_Port, you
must use the portCfgDefault command. You cannot use the portCfgExPort command because
that command is allowed only on the base switch.