manualshive.com logo in svg

Brocade Communications Systems 53-1001763-02, Руководство администратора

"Администраторский руководство Brocade Communications Systems 53-1001763-02 доступен для бесплатного скачивания с manualshive.com. Этот мануал предоставляет подробную информацию об использовании продукта. Не стесняйтесь загружать его прямо сейчас, чтобы быть в курсе всех функций и возможностей этого устройства."

Поделиться
Скачать
background image

xii

Fabric OS Administrator’s Guide

53-1001763-02

Firmware download on switches . . . . . . . . . . . . . . . . . . . . . . . . . . .193

Switch firmware download process overview. . . . . . . . . . . . . .194

Firmware download on an enterprise-class platform . . . . . . . . . . .196

Enterprise-class platform firmware download process overview196

Firmware download from a USB device. . . . . . . . . . . . . . . . . . . . . .200

Enabling USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200
Viewing the USB file system  . . . . . . . . . . . . . . . . . . . . . . . . . . .200
Downloading from USB using the relative path . . . . . . . . . . . .200
Downloading from USB using the absolute path . . . . . . . . . . .200

FIPS Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201

Public and Private Key Management . . . . . . . . . . . . . . . . . . . .201
The firmwareDownload Command . . . . . . . . . . . . . . . . . . . . . .201
Power-on Firmware Checksum Test  . . . . . . . . . . . . . . . . . . . . .202

Test and restore firmware on switches . . . . . . . . . . . . . . . . . . . . . .203

Testing a different firmware version on a switch . . . . . . . . . . .203

Test and restore firmware on enterprise-class platforms. . . . . . . .204

Testing different firmware versions on enterprise-class platforms205

Validating a firmware download . . . . . . . . . . . . . . . . . . . . . . . . . . . .207

Chapter 10

Managing Virtual Fabrics

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209

Virtual Fabrics overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209

Logical switch overview  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210

Default logical switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210
Logical switches and fabric IDs. . . . . . . . . . . . . . . . . . . . . . . . .212
Port assignment in logical switches . . . . . . . . . . . . . . . . . . . . .212
Logical switches and connected devices . . . . . . . . . . . . . . . . .213

Logical fabric overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214

Logical fabric and ISLs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215
Logical fabric and ISL sharing. . . . . . . . . . . . . . . . . . . . . . . . . .216

Management model for logical switches. . . . . . . . . . . . . . . . . . . . .219

Account management and Virtual Fabrics  . . . . . . . . . . . . . . . . . . .220

Supported platforms for Virtual Fabrics  . . . . . . . . . . . . . . . . . . . . .220

Supported port configurations in the Brocade 5100, 5300, and VA-
40FC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220
Supported port configurations in the Brocade DCX and DCX-4S221
Virtual Fabrics interaction with other Fabric OS features . . . .221

Limitations and restrictions of Virtual Fabrics  . . . . . . . . . . . . . . . .222

Restrictions on moving ports  . . . . . . . . . . . . . . . . . . . . . . . . . .223

Enabling Virtual Fabrics mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223

Disabling Virtual Fabrics mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . .224

Configuring logical switches to use basic configuration values. . .225

Creating a logical switch or base switch . . . . . . . . . . . . . . . . . . . . .225

Executing a command in a different logical fabric context  . . . . . .227

Содержание 53-1001763-02











































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 53-1001763-02

FARONICS POWER SAVE MAC Getting Started Manual preview
POWER SAVE MAC
Бренд: FARONICS Страницы: 5
FARONICS POWER SAVE Product Data Sheet preview
POWER SAVE
Бренд: FARONICS Страницы: 2
FARONICS DEEP FREEZE ENTERPRISE Getting Started Manual preview
DEEP FREEZE ENTERPRISE
Бренд: FARONICS Страницы: 3
FARONICS ANTI-EXECUTABLE ENTERPRISE Getting Started Manual preview
ANTI-EXECUTABLE ENTERPRISE
Бренд: FARONICS Страницы: 2
Adobe Acrobat 7.0.5 Manual preview
Acrobat 7.0.5
Бренд: Adobe Страницы: 122
AT&T OneVision DEFINITY G3 Fault Management and integration User Manual preview
OneVision DEFINITY G3 Fault Management and integration
Бренд: AT&T Страницы: 153
Sharp REACH User Manual preview
REACH
Бренд: Sharp Страницы: 16
Sharp AR-P17 Software setupg guide Software Setup Manual preview
AR-P17 Software setupg guide
Бренд: Sharp Страницы: 22
Sharp Qtopia Desktop Operation Manual preview
Qtopia Desktop
Бренд: Sharp Страницы: 39
Sharp FO-NS2 Operation Manual preview
FO-NS2
Бренд: Sharp Страницы: 43
Sharp AR-NB2A Online Manual preview
AR-NB2A
Бренд: Sharp Страницы: 48
Sharp MXUSX5 - Desk - PC User Manual preview
MXUSX5 - Desk - PC
Бренд: Sharp Страницы: 91
Sharp e-Copy ShareScan OP 3.0 Configuration Manual preview
e-Copy ShareScan OP 3.0
Бренд: Sharp Страницы: 144
Sharp PenCell IQ-9B01 Operation Manual preview
PenCell IQ-9B01
Бренд: Sharp Страницы: 247
Hollow Sun Vox Continental Instructions Manual preview
Vox Continental
Бренд: Hollow Sun Страницы: 9
I.R.I.S. READIRIS PRO 12 Getting Started Manual preview
READIRIS PRO 12
Бренд: I.R.I.S. Страницы: 10
Tektronix PhaserPrint 2.0 Configuration Manual preview
PhaserPrint 2.0
Бренд: Tektronix Страницы: 2
I.R.I.S. IPS9-FL Datasheet preview
IPS9-FL
Бренд: I.R.I.S. Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды