manualshive.com logo in svg

Brocade Communications Systems 53-1001763-02, Руководство администратора

"Администраторский руководство Brocade Communications Systems 53-1001763-02 доступен для бесплатного скачивания с manualshive.com. Этот мануал предоставляет подробную информацию об использовании продукта. Не стесняйтесь загружать его прямо сейчас, чтобы быть в курсе всех функций и возможностей этого устройства."

Поделиться
Скачать
background image

Fabric OS Administrator’s Guide

vii

53-1001763-02

Chapter 3

Performing Advanced Configuration Tasks

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

PIDs and PID binding overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Core PID addressing mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Fixed addressing mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
10-bit addressing mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
256-area addressing mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
WWN-based PID assignment  . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Setting port names  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Port identification by slot and port number . . . . . . . . . . . . . . . . 41
Port identification by port area ID. . . . . . . . . . . . . . . . . . . . . . . . 41
Port identification by index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Swapping port area IDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Port activation and deactivation . . . . . . . . . . . . . . . . . . . . . . . . .42
Setting port speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Setting the same speed for all ports on the switch. . . . . . . . . .44

Blade terminology and compatibility . . . . . . . . . . . . . . . . . . . . . . . . .44

CP blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Core blades  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Port and application blade compatibility . . . . . . . . . . . . . . . . . .46
FX8-24 compatibility notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Enabling and disabling blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Enabling blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Disabling blades. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Blade swapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Swapping blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Swapping blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Power management  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Powering off a port blade  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Powering on a port blade  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Equipment status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Checking switch operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Verifying High Availability features (directors and enterprise-class 
platforms only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Verifying fabric connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Verifying device connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Track and control switch changes . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Enabling the track changes feature . . . . . . . . . . . . . . . . . . . . . .56
Displaying the status of the track changes feature. . . . . . . . . . 57
Viewing the switch status policy threshold values. . . . . . . . . . . 57
Setting the switch status policy threshold values . . . . . . . . . . . 57

Audit log configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Auditable event classes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Verifying host syslog prior to configuring the audit log . . . . . . .60
Configuring an audit log for specific event classes . . . . . . . . . . 61

Содержание 53-1001763-02











































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 53-1001763-02

Panasonic WJ-ND300 Administrator Console Operating Instructions Manual preview
WJ-ND300 Administrator Console
Бренд: Panasonic Страницы: 27
IBM Nways 8260 Installation Instructions Manual preview
Nways 8260
Бренд: IBM Страницы: 25
Better Edge technology 5.2.7.0 User Manual preview
5.2.7.0
Бренд: Better Edge technology Страницы: 121
F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 - Getting Started Manual preview
ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 -
Бренд: F-SECURE Страницы: 29
Extron electronics AVT 100 User Manual preview
AVT 100
Бренд: Extron electronics Страницы: 37
Nexo NXtension-ES User Manual preview
NXtension-ES
Бренд: Nexo Страницы: 24
LEI Extras MapCreate Canada 6.3 Addendum preview
MapCreate Canada 6.3
Бренд: LEI Extras Страницы: 1
Autodesk 05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U CD Tutorial preview
05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U CD
Бренд: Autodesk Страницы: 21
Autodesk 00128-051462-9340 - AutoCAD 2008 - PC Manual preview
00128-051462-9340 - AutoCAD 2008 - PC
Бренд: Autodesk Страницы: 48
RADVision OnLAN User Manual preview
OnLAN
Бренд: RADVision Страницы: 12
Palm Treo Pro Supplementary Manual preview
Treo Pro
Бренд: Palm Страницы: 46
Key Curriculum Press Geometer's Sketchpad User Manual And Reference Manual preview
Geometer's Sketchpad
Бренд: Key Curriculum Press Страницы: 92
UNIBLUE POWERSUITE 2010 - V1 Product Manual preview
POWERSUITE 2010 - V1
Бренд: UNIBLUE Страницы: 13
Samsung ML 2510 - B/W Laser Printer Manual preview
ML 2510 - B/W Laser Printer
Бренд: Samsung Страницы: 33
Canon 2675B001 - SELPHY ES3 Photo Printer Software User'S Manual preview
2675B001 - SELPHY ES3 Photo Printer
Бренд: Canon Страницы: 49
Canon Powershot 500 Instruction Manual preview
Powershot 500
Бренд: Canon Страницы: 102
I.R.I.S. IRISSCAN 2 Getting Started Manual preview
IRISSCAN 2
Бренд: I.R.I.S. Страницы: 3
Jensen GPS navigation software for Audiovox NVX200 User Manual preview
GPS navigation software for Audiovox NVX200
Бренд: Jensen Страницы: 86

Бренды по названию

Популярные бренды

Загрузить еще бренды