manualshive.com logo in svg

Brocade Communications Systems 53-1001763-02, Руководство администратора

"Администраторский руководство Brocade Communications Systems 53-1001763-02 доступен для бесплатного скачивания с manualshive.com. Этот мануал предоставляет подробную информацию об использовании продукта. Не стесняйтесь загружать его прямо сейчас, чтобы быть в курсе всех функций и возможностей этого устройства."

Поделиться
Скачать
background image

162

Fabric OS Administrator’s Guide

53-1001763-02

Policy database distribution

7

switch:admin> 

fddcfg --showall

Local Switch Configuration for all Databases:-
     DATABASE  -  Accept/Reject
---------------------------------
          SCC  -         accept
          DCC  -         accept
          PWD  -         accept
          FCS  -         accept
         AUTH  -         accept
     IPFILTER  -         accept

Fabric Wide Consistency Policy:- "SCC:S;DCC"

Notes on joining a switch to the fabric

When a switch is joined to a fabric with a tolerant SCC or DCC fabric-wide consistency policy, the 
joining switch must have a matching tolerant SCC or DCC fabric-wide consistency policy. If the 
tolerant SCC or DCC fabric-wide consistency policies do not match, the switch can join the fabric, 
but an error message flags the mismatch. If the tolerant SCC and DCC fabric-wide consistency 
policies match, the corresponding SCC and DCC ACL policies are compared. 

The enforcement of fabric-wide consistency policy involves comparison of only the Active policy set. 
If the ACL policies match, the switch joins the fabric successfully. If the ACL policies are absent on 
the switch or on the fabric, the switch joins the fabric successfully, and the ACL policies are copied 
automatically from where they exist to where they are absent. The Active policies set where they 
exist and overwrite the Active and Defined policies where they are absent. If the ACL policies do not 
match, the switch can join the fabric, but an error message flags the mismatch. 

Under both conflicting conditions, secPolicyActivate is blocked in the merged fabric. Use the 
fddCfg

--

fabwideset command to resolve the fabric-wide consistency policy conflicts. Use the 

distribute command to explicitly resolve conflicting ACL policies.

When a switch is joined to a fabric with a strict SCC or DCC fabric-wide consistency policy, the 
joining switch must have a matching fabric-wide consistency policy. If the strict SCC or DCC 
fabric-wide consistency policies do not match, the switch cannot join the fabric and the neighboring 
E_Ports are disabled. If the strict SCC and DCC fabric-wide consistency policies match, the 
corresponding SCC and DCC ACL policies are compared. 

The enforcement of fabric-wide consistency policy involves comparison of only the Active policy set. 
If the ACL polices match, the switch joins the fabric successfully. If the ACL policies are absent 
either on the switch or on the fabric, the switch joins the fabric successfully, and the ACL policies 
are copied automatically from where they are present to where they are absent. The Active policy 
set where it is present overwrites the Active and Defined policy set where it is absent. If the ACL 
policies do not match, the switch cannot join the fabric and the neighboring E_Ports are disabled. 

Use the fddCfg 

–-

fabwideset command on either this switch or the fabric to set a matching strict 

SCC or DCC fabric-wide consistency policy. Use ACL policy commands to delete the conflicting ACL 
policy from one side to resolve ACL policy conflict. If neither the fabric nor the joining switch is 
configured with a fabric-wide consistency policy, there are no ACL merge checks required.

The descriptions above also apply to joining two fabrics. In this context, the joining switch becomes 
a joining fabric.

Содержание 53-1001763-02











































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 53-1001763-02

Tandberg Data IBM LOTUS NOTES-DOMINO V 11.3 - INSTALLATION AND ... Integration Manual preview
IBM LOTUS NOTES-DOMINO V 11.3 - INSTALLATION AND ...
Бренд: Tandberg Data Страницы: 49
Drobo How-To Manual preview
How-To
Бренд: Drobo Страницы: 6
KAPERSKY ANTI-VIRUS 5.1 - FOR MICROSOFT ISA SERVER Administrator'S Manual preview
ANTI-VIRUS 5.1 - FOR MICROSOFT ISA SERVER
Бренд: KAPERSKY Страницы: 67
Red Hat ENTERPRISE LINUX WS 2.1 - Installation Manual preview
ENTERPRISE LINUX WS 2.1 -
Бренд: Red Hat Страницы: 110
TRENDnet VIP-L16 - Configuration Manual preview
VIP-L16 -
Бренд: TRENDnet Страницы: 41
Ulead BD DISCRECORDER 2.7 User Manual preview
BD DISCRECORDER 2.7
Бренд: Ulead Страницы: 19
Adaptec 1210SA - Serial ATA RAID Controller User Manual preview
1210SA - Serial ATA RAID Controller
Бренд: Adaptec Страницы: 88
Nikon View DX Reference Manual preview
View DX
Бренд: Nikon Страницы: 38
GRASS VALLEY AURORA EDIT - INSTALLATION V7.1 Installation Manual preview
AURORA EDIT - INSTALLATION V7.1
Бренд: GRASS VALLEY Страницы: 152
Autodesk AUTOCAD PANDID 2011 - SYSTEM REQUIREMENTS Manual preview
AUTOCAD PANDID 2011 - SYSTEM REQUIREMENTS
Бренд: Autodesk Страницы: 2
Autodesk AUTOCAD MEP Brochure preview
AUTOCAD MEP
Бренд: Autodesk Страницы: 6
Autodesk AUTOCAD 2010 - Manual preview
AUTOCAD 2010 -
Бренд: Autodesk Страницы: 62
Autodesk 466B1-05A761-1304 - AutoCAD Inventor Simulation Suite 2010 Getting Started preview
466B1-05A761-1304 - AutoCAD Inventor Simulation Suite 2010
Бренд: Autodesk Страницы: 84
Autodesk 22906-010000-9325 - UPG FROM AUTOCAD 2000I-NET BUMP Network Manual preview
22906-010000-9325 - UPG FROM AUTOCAD 2000I-NET BUMP
Бренд: Autodesk Страницы: 104
Qlogic OFED+ Host Software User'S Manual preview
OFED+ Host
Бренд: Qlogic Страницы: 284
Qlogic SANsurfer FC HBA Manager User Manual preview
SANsurfer FC HBA Manager
Бренд: Qlogic Страницы: 152
Iqinvision IQ510 Manual preview
IQ510
Бренд: Iqinvision Страницы: 60
Sun Microsystems GlassFish 3 Installation Manual preview
GlassFish 3
Бренд: Sun Microsystems Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды