manualshive.com logo in svg

Brocade Communications Systems 53-1001763-02, Руководство администратора

"Администраторский руководство Brocade Communications Systems 53-1001763-02 доступен для бесплатного скачивания с manualshive.com. Этот мануал предоставляет подробную информацию об использовании продукта. Не стесняйтесь загружать его прямо сейчас, чтобы быть в курсе всех функций и возможностей этого устройства."

Поделиться
Скачать
background image

306

Fabric OS Administrator’s Guide

53-1001763-02

Zone management in interoperable fabrics

14

 

Zone management in interoperable fabrics

McDATA Fabric and McDATA Open Fabric modes support zone activation using an M-series 
management tool such as such as Data Center Fabric Manager (DCFM) or Web Tools. The 
command line interface (CLI) can also be used as a zone management tool for both IM2 and IM3. 
CLI commands are very limited in IM3. CLI commands for IM3 are available for Frame Redirect 
support. All management tools can be launched at one time. Although, nothing prevents you from 
attempting to make changes to the zone configuration at the same time, DCFM is the preferred 
management tool.

The Defined Database is where special zones, such as, Frame Redirection and Traffic Isolation 
zones, reside on Fabric OS switches. When joining switches in a mixed fabric, the Defined 
Database does not merge with the M-series switch zoning databases. McDATA Fabric and McDATA 
Open Fabric modes support zone activation, which allows fabric-wide and stand-alone zone 
configurations, for Traffic Isolation and Frame Redirection only. You can create new zones, modify 
existing zones, and then save these configurations to the Defined Database on the local Fabric OS 
switch. This allows the distribution of the Defined Database to all Fabric OS switches in McDATA 
Fabric mode in the case where the Fabric OS switches are used to control zone management for TI 
and FR zones. When joining switches in a mixed fabric, the Defined Database does not merge with 
M-series switches. 

Zoning restrictions

Before creating or configuring a zone, note the following zoning characteristics and requirements 
for McDATA Fabric and McDATA Open Fabric modes:

•

There are four zoning limits that must be met:

-

Maximum Number of Zones – 2047 (+1 for the default zone)

-

Maximum Number of Members per Zone – 4096

-

Maximum Number of Unique Zone Members per Zone Set – 4096

-

Maximum Zone Set Definition Size – 2048 Kb

•

IM2 and IM3 support LSAN zones to export devices across an FCR backbone. The FCR 
backbone cannot be in IM2 or IM3, it must be in IM0.

•

Only zoning by port WWN is allowed in IM3 only; you must use the port WWN of the device, 
such as 10:00:00:00:c9:28:c7:c6.

•

Zone members specified by node WWN are ignored.

•

Zone database is managed on the DCFM management server.

•

Fabric OS switches connected to M-EOS switches receive the effective configuration when a 
zone merge occurs. (M-EOS only has an effective zone configuration and discards the defined 
zone configuration when it sends merge information to the Fabric OS switch.) However, a zone 
update sends the defined and effective configuration to all switches in the fabric.

•

When no zoning configuration is in effect, and without default zoning enabled on an M-EOS 
switch, by default, all ports are isolated and traffic is not permitted. This is unlike Brocade 
behavior with Brocade Native mode enabled (and all data traffic is enabled). If the default zone 
is disabled and there is no active configuration, then no device can communicate with any 
other device in the fabric if zoning is disabled on a Fabric OS switch.

•

Defining zones in the effective configuration or the Defined Database is allowed in IM2 only. 

•

Legacy McDATA switches do not support the Defined Database or merge propagation.

Содержание 53-1001763-02











































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 53-1001763-02

Halcro RS232 Specification preview
RS232
Бренд: Halcro Страницы: 12
KAPERSKY ANTI-VIRUS 5.0 - FOR SAMBA SERVERS Administrator'S Manual preview
ANTI-VIRUS 5.0 - FOR SAMBA SERVERS
Бренд: KAPERSKY Страницы: 84
KAPERSKY ADMINISTRATION KIT 6.0 Getting Started preview
ADMINISTRATION KIT 6.0
Бренд: KAPERSKY Страницы: 37
KAPERSKY ADMINISTRATION KIT 6.0 Deployment Manual preview
ADMINISTRATION KIT 6.0
Бренд: KAPERSKY Страницы: 109
Samsung HXDU010EB - Story Station 1 TB External Hard... User Manual preview
HXDU010EB - Story Station 1 TB External Hard...
Бренд: Samsung Страницы: 7
Snom Configuring snom phones for Mass Deployment Frequently Asked Questions Manual preview
Configuring snom phones for Mass Deployment
Бренд: Snom Страницы: 22
ITech IT9000 Installation Instruction preview
IT9000
Бренд: ITech Страницы: 22
Red Hat ENTERPRISE VIRTUALIZATION FOR DESKTOPS Solution Manual preview
ENTERPRISE VIRTUALIZATION FOR DESKTOPS
Бренд: Red Hat Страницы: 14
NeatWorks TV708LL/A - NeatWorks For Mac Using Manual preview
TV708LL/A - NeatWorks For Mac
Бренд: NeatWorks Страницы: 33
McAfee WEBSHIELD SMTP Datasheet preview
WEBSHIELD SMTP
Бренд: McAfee Страницы: 2
Lenovo Active Protection System Manual preview
Active Protection System
Бренд: Lenovo Страницы: 10
Lenovo Aptiva Hardware Maintenance Manual preview
Aptiva
Бренд: Lenovo Страницы: 464
Lenovo ACTIVATION Error Code List preview
ACTIVATION
Бренд: Lenovo Страницы: 3
DeLorme Earthmate GPS BT-20 Quick Start Manual preview
Earthmate GPS BT-20
Бренд: DeLorme Страницы: 9
Red Hat CERTIFICATE 7.3 RELEASE NOTES Release Note preview
CERTIFICATE 7.3 RELEASE NOTES
Бренд: Red Hat Страницы: 24
Red Hat DEVICE-MAPPER MULTIPATH 4.6 Configuration And Administration Manual preview
DEVICE-MAPPER MULTIPATH 4.6
Бренд: Red Hat Страницы: 42
2Wire Wireless PCI Adapter Driver Installation Instructions preview
Wireless PCI Adapter Driver
Бренд: 2Wire Страницы: 4
Adaptec 1210SA - Serial ATA RAID Controller User Manual preview
1210SA - Serial ATA RAID Controller
Бренд: Adaptec Страницы: 88

Бренды по названию

Популярные бренды

Загрузить еще бренды