manualshive.com logo in svg

Brocade Communications Systems 53-1001763-02, Руководство администратора

"Администраторский руководство Brocade Communications Systems 53-1001763-02 доступен для бесплатного скачивания с manualshive.com. Этот мануал предоставляет подробную информацию об использовании продукта. Не стесняйтесь загружать его прямо сейчас, чтобы быть в курсе всех функций и возможностей этого устройства."

Поделиться
Скачать
background image

xviii

Fabric OS Administrator’s Guide

53-1001763-02

Viewing installed licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .375

Activating a license . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .375

Adding a licensed feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376

Removing a licensed feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .377

Ports on Demand  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .377

Activating Ports on Demand . . . . . . . . . . . . . . . . . . . . . . . . . . .379
Dynamic Ports on Demand . . . . . . . . . . . . . . . . . . . . . . . . . . . .379
Displaying the port license assignments . . . . . . . . . . . . . . . . .379
Enabling Dynamic Ports on Demand . . . . . . . . . . . . . . . . . . . .380
Disabling Dynamic Ports on Demand. . . . . . . . . . . . . . . . . . . .380
Reserving a port license . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .381
Releasing a port from a POD set. . . . . . . . . . . . . . . . . . . . . . . .382

Chapter 17

Monitoring Fabric Performance

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .383

Advanced Performance Monitoring overview . . . . . . . . . . . . . . . . .383

Types of monitors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .383
Virtual Fabrics considerations for Advanced Performance Monitoring
384

End-to-end performance monitoring . . . . . . . . . . . . . . . . . . . . . . . .385

End-to-end monitors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .385
Adding end-to-end monitors  . . . . . . . . . . . . . . . . . . . . . . . . . . .386
Setting a mask for an end-to-end monitor . . . . . . . . . . . . . . . .387
Deleting end-to-end monitors . . . . . . . . . . . . . . . . . . . . . . . . . .388

Frame monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .389

Creating frame types to be monitored . . . . . . . . . . . . . . . . . . .390
Deleting frame types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391
Adding frame monitors to a port. . . . . . . . . . . . . . . . . . . . . . . .391
Removing frame monitors from a port . . . . . . . . . . . . . . . . . . .391
Saving frame monitor configuration . . . . . . . . . . . . . . . . . . . . .391
Displaying frame monitors  . . . . . . . . . . . . . . . . . . . . . . . . . . . .392
Clearing frame monitor counters  . . . . . . . . . . . . . . . . . . . . . . .392

ISL performance monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .393

Top Talker monitors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .393

Adding a Top Talker monitor on an F_Port . . . . . . . . . . . . . . . .394
Adding Top Talker monitors on all switches in the fabric (fabric mode)
394
Displaying the top n bandwidth-using flows on an F_Port  . . .395
Displaying top talking flows for a given domain ID (fabric mode)396
Deleting a Top Talker monitor on an F_Port . . . . . . . . . . . . . . .396
Deleting the fabric mode Top Talker monitors . . . . . . . . . . . . .396
Limitations of Top Talker monitors . . . . . . . . . . . . . . . . . . . . . .397

Trunk monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .397

Displaying end-to-end and ISL monitor counters  . . . . . . . . . . . . . .397

Clearing end-to-end and ISL monitor counters . . . . . . . . . . . . . . . .398

Saving and restoring monitor configurations  . . . . . . . . . . . . . . . . .399

Содержание 53-1001763-02











































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 53-1001763-02

Canon EOS 60D Quick Start Manual preview
EOS 60D
Бренд: Canon Страницы: 5
Waves Linear-Phase MultiBand Software Audio Processor User Manual preview
Linear-Phase MultiBand Software Audio Processor
Бренд: Waves Страницы: 27
Sybase Adaptive Server Anywhere SNMP Extension Agent User Manual preview
Adaptive Server Anywhere SNMP Extension Agent
Бренд: Sybase Страницы: 70
Qlogic SANbox-8 User Manual preview
SANbox-8
Бренд: Qlogic Страницы: 180
MACROMEDIA FLASH 8-USING FLASH VIDEO ENCODER Use Manual preview
FLASH 8-USING FLASH VIDEO ENCODER
Бренд: MACROMEDIA Страницы: 30
Billion BiGuard C01 Quick Installation Manual preview
BiGuard C01
Бренд: Billion Страницы: 18
Ulead VIDEOSTUDIO 11 User Manual preview
VIDEOSTUDIO 11
Бренд: Ulead Страницы: 168
ADS Technologies DVR Quick Manual preview
DVR
Бренд: ADS Technologies Страницы: 2
OneTouch Diabetes Management Software v2.2 Quick Reference Manual preview
Diabetes Management Software v2.2
Бренд: OneTouch Страницы: 13
BT Voyager Digital Media Player Installation & User Manual preview
Voyager Digital Media Player
Бренд: BT Страницы: 30
Qlogic OFED+ Host Software User'S Manual preview
OFED+ Host
Бренд: Qlogic Страницы: 284
MACROMEDIA COLDFUSION MX 61 - CONFIGURING AND ADMINISTERING COLDFUSION... Using Manual preview
COLDFUSION MX 61 - CONFIGURING AND ADMINISTERING COLDFUSION...
Бренд: MACROMEDIA Страницы: 70
Nortel Symposium TAPI Service Provider for Succession 3.0 User Manual preview
Symposium TAPI Service Provider for Succession 3.0
Бренд: Nortel Страницы: 198
Zennio Z41 User Manual preview
Z41
Бренд: Zennio Страницы: 15
McAfee VIRUSSCAN 5.1 User Manual preview
VIRUSSCAN 5.1
Бренд: McAfee Страницы: 315
YOKOGAWA AQ7932 Operation Manual preview
AQ7932
Бренд: YOKOGAWA Страницы: 29
FARONICS ANTI-EXECUTABLE STANDARD Manual preview
ANTI-EXECUTABLE STANDARD
Бренд: FARONICS Страницы: 46
UNIBLUE DISKRESCUE 2009 - V1 Manual preview
DISKRESCUE 2009 - V1
Бренд: UNIBLUE Страницы: 26

Бренды по названию

Популярные бренды

Загрузить еще бренды