manualshive.com logo in svg

Brocade Communications Systems 53-1001763-02, Руководство администратора

"Администраторский руководство Brocade Communications Systems 53-1001763-02 доступен для бесплатного скачивания с manualshive.com. Этот мануал предоставляет подробную информацию об использовании продукта. Не стесняйтесь загружать его прямо сейчас, чтобы быть в курсе всех функций и возможностей этого устройства."

Поделиться
Скачать
background image

Fabric OS Administrator’s Guide

xiii

53-1001763-02

Deleting a logical switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .228

Adding and removing ports on a logical switch. . . . . . . . . . . . . . . .229

Displaying logical switch configuration . . . . . . . . . . . . . . . . . . . . . .230

Changing the fabric ID of a logical switch . . . . . . . . . . . . . . . . . . . .230

Changing a logical switch to a base switch . . . . . . . . . . . . . . . . . . .231

Setting up IP addresses for a Virtual Fabric . . . . . . . . . . . . . . . . . .232

Removing an IP address for a Virtual Fabric . . . . . . . . . . . . . . . . . .232

Configuring a logical switch to use XISLs  . . . . . . . . . . . . . . . . . . . .232

Changing the context to a different logical fabric . . . . . . . . . . . . . .233

Creating a logical fabric using XISLs . . . . . . . . . . . . . . . . . . . . . . . .234

Chapter 11

Administering Advanced Zoning

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237

Special zones  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237

Zoning overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238

Zone types  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .239
Zone objects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240
Zone aliases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
Zone configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242
Zoning enforcement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242
Considerations for zoning architecture  . . . . . . . . . . . . . . . . . .243
Best practices for zoning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .244

Broadcast zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .244

Broadcast zones and Admin Domains . . . . . . . . . . . . . . . . . . .244
Broadcast zones and FC-FC routing . . . . . . . . . . . . . . . . . . . . .245
High availability considerations with broadcast zones . . . . . .246
Loop devices and broadcast zones  . . . . . . . . . . . . . . . . . . . . .246
Broadcast zones and default zoning  . . . . . . . . . . . . . . . . . . . .246

Zone aliases  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .246

Creating an alias  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .246
Adding members to an alias . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
Removing members from an alias . . . . . . . . . . . . . . . . . . . . . . 247
Deleting an alias  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .248
Viewing an alias in the defined configuration . . . . . . . . . . . . .248

Zone creation and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . .249

Creating a zone  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .249
Adding devices (members) to a zone . . . . . . . . . . . . . . . . . . . .249
Removing devices (members) from a zone . . . . . . . . . . . . . . .250
Deleting a zone  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250
Viewing a zone in the defined configuration  . . . . . . . . . . . . . .251
Validating a zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251

Default zoning mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .252

Setting the default zoning mode. . . . . . . . . . . . . . . . . . . . . . . .252
Viewing the current default zone access mode. . . . . . . . . . . .253

Zoning database size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253

Содержание 53-1001763-02











































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 53-1001763-02

Canon PowerShot A410 Software Starter Manual preview
PowerShot A410
Бренд: Canon Страницы: 106
3Com 3C19250 - USB Ethernet Network Interface... User Manual preview
3C19250 - USB Ethernet Network Interface...
Бренд: 3Com Страницы: 16
MACROMEDIA FIREWORKS 2-USING FIREWORKS Use Manual preview
FIREWORKS 2-USING FIREWORKS
Бренд: MACROMEDIA Страницы: 20
Intergraph InterSite Quick Start Manual preview
InterSite
Бренд: Intergraph Страницы: 46
Blamsoft VK-1 Viking User Manual preview
VK-1 Viking
Бренд: Blamsoft Страницы: 28
Lexicon MPX NATIVE REVERB PLUG-IN Owner'S Manual preview
MPX NATIVE REVERB PLUG-IN
Бренд: Lexicon Страницы: 24
SMART SMART Notebook SE Installation Manual preview
SMART Notebook SE
Бренд: SMART Страницы: 20
SimpleTech FV-U35/250 User Manual preview
FV-U35/250
Бренд: SimpleTech Страницы: 108
Juniper STRM 2008.2R2 - UPGRADING TO STRM 2008.2R2 REV 2 Upgrade Manual preview
STRM 2008.2R2 - UPGRADING TO STRM 2008.2R2 REV 2
Бренд: Juniper Страницы: 5
Globalsat GPS Information User Manual preview
GPS Information
Бренд: Globalsat Страницы: 7
GRASS VALLEY EDIUS User Reference Manual preview
EDIUS
Бренд: GRASS VALLEY Страницы: 790
AMX AXD-CP4/A Specifications preview
AXD-CP4/A
Бренд: AMX Страницы: 3
Tech Source RAPTOR 2100T - RAPTOR DRIVERS FOR LINUX INSTALLATION AND Brochure preview
RAPTOR 2100T - RAPTOR DRIVERS FOR LINUX INSTALLATION AND
Бренд: Tech Source Страницы: 2
TROY Group IRD 2300 Quick Start Manual preview
IRD 2300
Бренд: TROY Group Страницы: 10
FieldServer FS-8700-52 Driver Manual preview
FS-8700-52
Бренд: FieldServer Страницы: 17
MACROMEDIA BREEZE 5-MANAGER Manual preview
BREEZE 5-MANAGER
Бренд: MACROMEDIA Страницы: 306
Native Instruments Reaktor Prism Manual preview
Reaktor Prism
Бренд: Native Instruments Страницы: 58
Microtek ScanMaker X6 EPP User Manual preview
ScanMaker X6 EPP
Бренд: Microtek Страницы: 15

Бренды по названию

Популярные бренды

Загрузить еще бренды