• Ensure that you have the following items:
- A cradle wall-mount kit containing a wall-mount bracket. You must order this part
separately.
- Two or four screws depending on how you are mounting your Avaya Vantage
™
device.
You need four screws if you are mounting the device using screws. If you are mounting the
device on a telephone wall plate, you only need two screws for the handset cradle. The
handset cradle uses the same type of wall mounting screws as the Avaya Vantage
™
device.
- Phillips-head screwdriver.
- Pencil.
- An Ethernet cable. If you are mounting the device on a telephone wall plate, use a short
cable.
Procedure
1. Use a pencil to mark screw holes.
• If you are using screws to mount the Avaya Vantage
™
device, mark two pairs of screw
holes, where each pair has two holes that are vertically spaced at 4 inches apart. Keep
a horizontal distance of 3.47 inches between the two pairs of screw holes.
• If you are mounting the device on a pre-installed telephone wall plate, mark two screw
holes for the handset cradle to the left of the wall-mount plate. You must space the
screw holes horizontally from each stud on the wall plate by 3.47 inches.
Wall mounting options for Avaya Vantage
™
April 2021
Using Avaya Vantage
™
49
