2. Tap
Network & Internet
>
Network mode
.
3. Select
Wi-Fi
.
4. On the Network & Internet screen, tap
Wi-Fi
, and choose the required network.
5. For a network that requires authentication, enter the network credentials and select the
appropriate CA certificate option from the following:
•
Use system certificates
•
Do not validate
•
List of trusted certificates installed on Wi-Fi certificate repository
, if available
On a new device, no trusted certificates are installed in the repository, so you cannot
select this option.
6. Tap
Connect
.
If the credentials are authenticated successfully, the device connects to the Wi-Fi network.
Handset connection to Avaya Vantage
™
Avaya Vantage
™
provides a built-in speaker and microphone, so a handset is not required to make
and manage calls. You can purchase either wired or wireless handsets separately. The handsets
come with a cradle kit. To use a handset with Avaya Vantage
™
, you need to connect the handset
cradle with the device.
Connecting the handset cradle to Avaya Vantage
™
About this task
Use this procedure to connect your handset cradle to the Avaya Vantage
™
device. The handset
cradle is required for both wired and wireless handsets.
Warning:
When installing the cradle, be careful not to bend the connector pins.
Before you begin
• Ensure that you have the following equipment:
- Avaya Vantage
™
device.
- Handset cradle with a connection cable.
• Ensure that the Avaya Vantage
™
device is not connected to a power source.
Procedure
1. Place the device with the right side touching the tabletop so that the left side, which is
where the handset cradle must be attached, is facing up.
Device setup
April 2021
Using Avaya Vantage
™
40
