2. On the left side of the Avaya Vantage
™
device, remove the rubber gasket that protects the
cradle connector pins.
One cradle connector pin is closed so that you can position the cradle in the correct
direction.
3. Connect the handset cradle cable to the cradle connector of the Avaya Vantage
™
device.
Tip:
Bend the cradle cable to make an arc so that you can join the cable with the cradle
connector easily.
4. Connect the cradle to the Avaya Vantage
™
device while ensuring that the connection cable
is not squeezed between the cradle and the device.
5. Connect the handset cradle stand crossbar to the slot in the Avaya Vantage
™
stand from
behind.
6. Connect the handset cradle to the cradle stand using the hinge on the rear panel of the
cradle.
7. If you are using a wired handset, plug one end of the RJ9 handset cord to the handset and
the other end to the RJ9 port at the handset cradle base
Next steps
Connect Avaya Vantage
™
to the power source.
Connecting a wired handset
About this task
Use this procedure to connect a wired handset to your Avaya Vantage
™
.
Before you begin
Ensure that the handset cradle is connected to the Avaya Vantage
™
device.
Procedure
1. Plug the non-spiral end of the handset cord into the handset connector on the handset
cradle.
2. Plug the other end into the connector on the handset.
Connecting a wireless handset
About this task
Use this procedure to connect or pair a wireless handset with your Avaya Vantage
™
device. After
pairing a wireless handset with your Avaya Vantage
™
device, you cannot use the wired handset.
You can pair only one wireless handset with a device at a time.
Handset connection to Avaya Vantage
™
April 2021
Using Avaya Vantage
™
41