6. Align the slots on the device stand with the wall plate studs and slide the device down until
it attaches securely to the wall plate.
4.00 in
(101.6mm)
7. Place any dangling cables through the cable-access openings at the bottom of the stand
and around the rubber wedge.
Wall mounting Avaya Vantage
™
along with a handset cradle
About this task
You can wall mount Avaya Vantage
™
using two screws or a telephone wall plate. You do not need
a separate mounting kit for the device. However, you cannot directly wall mount the handset
cradle using its tilt stand. You must separately purchase a cradle wall-mount kit that contains a
wall-mount bracket. The part number of the cradle wall-mount kit is 700512776.
Before you begin
• Ensure that you are familiar with the standard processes for wall mounting an Avaya
Vantage
™
device using screws or a telephone wall plate. See those wall mounting
procedures for the detailed steps.
Device setup
April 2021
Using Avaya Vantage
™
48
