AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 74 / 390

SIP User's Manual 74 Document #: LTRT-65409
MediaPack Series
Table 5-8: General Parameters (Protocol Definition)
Parameter Description
SIP TCP Local Port
[TCPLocalSIPPort]
Local TCP port used to receive SIP messages.
The default value is 5060.
SIP TLS Local Port
[TLSLocalSIPPort]
Local TLS port used to receive SIP messages.
The default value is 5061.
Note:
The value of TLSLocalSIPPort must be different to the value of
TCPLocalSIPPort.
Enable SIPS
[EnableSIPS]
Enables secured SIP (SIPS) connections over multiple hops.
ƒ
[0]
Disable (default).
ƒ
[1]
Enable.
When SIPTransportType = 2 (TLS) and EnableSIPS is disabled, TLS is
used for the next network hop only. When SIPTransportType = 2 (TLS) or
1 (TCP) and EnableSIPS is enabled, TLS is used through the entire
connection (over multiple hops).
Note:
If SIPS is enabled and SIPTransportType = UDP, the connection
fails.
Enable TCP Connection
Reuse
[EnableTCPConnection
Reuse]
Enables the reuse of the same TCP connection for all calls to the same
destination.
Valid options include:
ƒ
[0]
Disable = Use a separate TCP connection for each call (default)
ƒ
[1]
Enable = Use the same TCP connection for all calls
TCP Timeout
[SIPTCPTimeout]
Defines the Timer B and Timer F (as defined in RFC 3261) when the SIP
Transport Type is TCP.
The valid range is 0 to 40 sec. The default value is SIPT1Rtx * 64 msec.
SIP Destination Port
[SIPDestinationPort]
SIP destination port for sending initial SIP requests.
The valid range is 1 to 65534. The default port is 5060.
Note:
SIP responses are sent to the port specified in the Via header.
Use “user=phone” in SIP
URL
[IsUserPhone]
ƒ
[0]
No = 'user=phone' string isn't used in SIP URI.
ƒ
[1]
Yes = 'user=phone' string is part of the SIP URI (default).
Use “user=phone” in
From Header
[IsUserPhoneInFrom]
ƒ
[0]
No = Doesn't use ';user=phone' string in From header (default).
ƒ
[1]
Yes = ';user=phone' string is part of the From header.
Use Tel URI for Asserted
Identity
[UseTelURIForAsserted
ID]
Determines the format of the URI in the P-Asserted and P-Preferred
headers.
ƒ
[0]
Disable = 'sip:' (default).
ƒ
[1]
Enable = 'tel:'.
Tel to IP No Answer
Timeout
[IPAlertTimeout]
Defines the time (in seconds) the gateway waits for a 200 OK response
from the called party (IP side) after sending an INVITE message. If the
timer expires, the call is released.
The valid range is 0 to 3600. The default value is 180.