AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 153 / 390

Version 5.2 153 August 2007
SIP User's Manual 5. Web-based Management
5.5.8.5 Caller ID Permissions
The 'Caller ID Permissions' screen is used to enable or disable (per port) the Caller ID
generation (for FXS gateways) and detection (for FXO gateways). If a port isn't configured,
its Caller ID generation / detection are determined according to the global parameter
EnableCallerID (described in 'Supplementary Services' on page
108 ).
You can also configure the Caller ID Permissions table using the
ini
file parameter
EnableCallerID (refer to 'Analog Telephony Parameters' on page 294 ).
¾
To configure the Caller ID Permissions Table, take these 5 steps:
1.
Open the 'Caller ID Permissions' screen (
Protocol Management
menu >
Endpoint
Settings
>
Caller ID Permissions
option).
Figure 5-32: Caller ID Permissions Screen
2.
In the 'Caller ID' field, select one of the following:
•
Enable: Enables Caller ID generation (FXS) or detection (FXO) for the specific
port.
•
Disable: Caller ID generation (FXS) or detection (FXO) for the specific port is
disabled.
•
Empty: Caller ID generation (FXS) or detection (FXO) for the specific port is
determined according to the parameter EnableCallerID (described in
'Supplementary Services' on page
108 ).
3.
Repeat Step 2 for each port.
4.
Click the
Submit
button to save your changes.
5.
To save the changes to flash memory, refer to 'Saving Configuration' on page 238 .
5.5.8.6 Call Waiting
The 'Call Waiting' screen is used to configure call waiting per gateway port
.
You can also configure the Call Waiting table using the
ini
file parameter
CallWaitingPerPort (refer to 'SIP Configuration Parameters' on page 279 ).
Note:
If Call Waiting per port is not configured (using the 'Call Waiting' screen, then
use the global (i.e., for all ports) call waiting parameter 'Enable Call Waiting'
(EnableCallWaiting) in 'Supplementary Services' on page
108 .