AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 204 / 390

SIP User's Manual 204 Document #: LTRT-65409
MediaPack Series
An example of an IPSec SPD Table is shown below:
[ IPSEC_SPD_TABLE ]
Format SPD_INDEX = IPSecPolicyRemoteIPAddress, IpsecPolicySrcPort,
IPSecPolicyDStPort,IPSecPolicyProtocol, IPSecPolicyLifeInSec,
IPSecPolicyProposalEncryption_0,
IPSecPolicyProposalAuthentication_0,
IPSecPolicyProposalEncryption_1,
IPSecPolicyProposalAuthentication_1,
IPSecPolicyKeyExchangeMethodIndex, IPSecPolicyLocalIPAddressType;
IPSEC_SPD_TABLE 0 = 10.11.2.21, 0, 0, 17, 900, 1,2, 2,2 ,1, 0;
[ \IPSEC_SPD_TABLE ]
In the IPSec SPD example, all packets designated to IP address 10.11.2.21 that originates
from the OAM interface (regardless to their destination and source ports) and whose
protocol is UDP are encrypted, the IPSec SPD also defines an SA lifetime of 900 seconds
and two security proposals: DES/SHA1 and 3DES/SHA1.
5.8.7 Configuring the IKE Table
The 'IKE Table' screen is used to configure the IKE parameters.
¾
To configure the IKE table using the Embedded Web Server, take
these 6 steps:
1.
Access the Embedded Web Server (refer to 'Accessing the Embedded Web Server'
on page
58 ).
2.
Open the ‘IKE Table’ screen (
Advanced Configuration
menu >
Security Settings
>
IKE Table
option).
Figure 5-52: IKE Table Screen