AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 152 / 390

SIP User's Manual 152 Document #: LTRT-65409
MediaPack Series
¾
To configure the Call Forward table, take these 4 steps:
1.
Open the 'Call Forward Table' screen (
Protocol Management
menu >
Endpoint
Settings
submenu >
Call Forward
option).
Figure 5-31: Call Forward Table Screen
2.
Configure the Call Forward parameters for each port according to the table below.
3.
Click the
Submit
button to save your changes.
4.
To save the changes to flash memory, refer to 'Saving Configuration' on page 238 .
Table 5-25: Call Forward Table
Parameter Description
Forward Type
ƒ
[0]
Deactivate = Don't forward incoming calls (default).
ƒ
[1]
On Busy = Forward incoming calls when the gateway port is busy.
ƒ
[2]
Unconditional = Forward any incoming call to the phone number
specified in the 'Forward to Phone Number' field.
ƒ
[3]
No Answer = Forward incoming calls that are not answered within
the time specified in the 'Time for No Reply Forward' field.
ƒ
[4]
On Busy or No Answer = Forward incoming calls when the port is
busy or when calls are not answered after a configurable period of
time.
ƒ
[5]
Do Not Disturb = Immediately reject incoming calls.
Forward to Phone
Number
Enter the telephone number or URI (number@IP address) to which the
call is forwarded.
Note:
If this field only contains a telephone number and a Proxy isn't
used, the 'forward to' phone number must be specified in the 'Tel to IP
Routing' table of the forwarding gateway.
Time for No Reply
Forward
If you have set the Forward Type for this port to No Answer, enter the
number of seconds the gateway waits before forwarding the call to the
phone number specified.