AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 241 / 390

Version 5.2 241 August 2007
SIP User's Manual 5. Web-based Management
¾
To restore the ini file, take these 4 steps:
1.
Click the
Browse
button.
2.
Navigate to the folder that contains the
ini
file you want to load.
3.
Click the file and click the
Open
button; the name and path of the file appear in the
field beside the Browse button.
4.
Click the
Send ini File
button, and then at the prompt, click
OK;
the gateway is
automatically reset (from the
cmp
version stored on the flash memory).
5.12.6 Factory Default Settings
5.12.6.1 Defining Default Values
The gateway is shipped with factory default configuration values stored on its non-volatile
flash memory. However, you can re-define your own default values instead of using the
factory defaults. This is performed using another
ini
file (in addition to the standard
ini
file)
that includes [ClientDefaults] as the header. Below this header, simply define new default
values for the required
ini
file parameters. The parameters are defined in the same format
as in the standard
ini
file, and loaded to the gateway using TFTP (not via the Embedded
Web Server).
¾
To define default values for gateway parameters, take these 2
steps:
1.
Configure the ClientDefaults
ini
file with new default values for parameters, as needed.
2.
Load the ClientDefaults
ini
file to the gateway using TFTP (refer to the
SIP Series
Reference Manual
).
An example of the ClientsDefault
ini
file (changing default values for Syslog server
parameters) is shown below:
[ClientDefaults]
EnableSyslog = 1
SyslogServerIP = 10.13.2.20
¾
To remove user-defined defaults and restore factory default
values, take this step:
„ Load an empty (i.e., without any parameters) ClientDefaults
ini
file to the gateway,
using TFTP.
5.12.6.2 Restoring Default Settings
You can use the gateway's hardware Reset button to restore all the gateway's
configuration settings to default (e.g., IP address and login username and password).
These default settings include factory as well as user-defined (refer to 'Defining Default
Values' on page
241 ) defaults, where user-defined defaults override corresponding factory
defaults.