AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 216 / 390

SIP User's Manual 216 Document #: LTRT-65409
MediaPack Series
5.10 Status & Diagnostics
The
Status & Diagnostics
menu is used to view and monitor the gateway's channels,
Syslog messages, hardware and software product information, and to assess the
gateway's statistics and IP connectivity information.
5.10.1 Gateway Statistics
The 'Gateway Statistics' screens under the Gateway Statistics menu is used to monitor
real-time activity such as IP connectivity information, call details and call statistics,
including the number of call attempts, failed calls, fax calls, etc.
Note:
The 'Gateway Statistics' screens don't refresh automatically. To view updated
information, re-access the required screen.
5.10.1.1 IP Connectivity
The 'IP Connectivity' screen provides you with online, read-only network diagnostic
connectivity information on all destination IP addresses configured in the 'Tel to IP Routing'
screen (refer to 'Tel to IP Routing Table' on page
129 ).
Notes:
•
This information is available only if the parameter
AltRoutingTel2IPEnable (described in the table below) is set to 1
(Enable) or 2 (Status Only).
•
The information in columns 'Quality Status' and 'Quality Info.' (per IP
address) is reset if two minutes elapse without a call to that destination.
¾
To view the IP connectivity information, take these 2 steps:
1.
Set the parameter 'Enable Alt Routing Tel to IP' (or
ini
file parameter
AltRoutingTel2IPEnable) to Enable
[1]
or Status Only
[2]
. To configure this parameter,
refer to 'General Parameters' on page 127 .
2.
Open the 'IP Connectivity' screen (
Status & Diagnostics
menu >
Gateway Statistics
submenu >
IP Connectivity
).