AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 161 / 390

Version 5.2 161 August 2007
SIP User's Manual 5. Web-based Management
3.
Click the
Submit
button to save your changes.
4.
To save the changes to flash memory, refer to 'Saving Configuration' on page 238 .
Table 5-28: Voice Mail Parameters
Parameter Description
General
Voice Mail Interface
[VoiceMailInterface]
Enables the VM application on the gateway and determines the
communication method used between the PBX and the gateway.
ƒ
[0]
None (default)
ƒ
[1]
DTMF
[2]
SMDI
Line Transfer Mode
[LineTransferMode]
Determines the transfer method used by the gateway.
ƒ
[0]
None = IP (default).
ƒ
[1]
Blind = PBX blind transfer. After receiving a REFER message
from the IP side, the FXO sends a hook-flash to the PBX, dials the
digits (that are received in the Refer-To header), and then
immediately drops the line (on-hook). The PBX performs the transfer
internally.
ƒ
[2]
Semi Supervised = PBX Semi-Supervised transfer. After receiving
a REFER message from the IP side, the FXO sends a hook-flash to
the PBX, and then dials the digits (that are received in the Refer-To
header). If no Busy or Reorder tones are detected (within
approximately 2 seconds), the gateway completes the call transfer by
releasing the line; otherwise, the transfer is cancelled, the gateway
sends a SIP NOTIFY message with a failure reason in the NOTIFY
body (such as 486 if busy tone detected), and generates an
additional hook-flash towards the FXO line to restore connection to
the original call.
ƒ
[3]
Supervised = PBX Supervised transfer. After receiving a REFER
message from the IP side, the FXO sends a hook-flash to the PBX,
and then dials the digits (that are received in the Refer-To header).
The FXO waits for connection of the transfer call and if speech is
detected (e.g., "hello") within approximately 2 seconds, the gateway
completes the call transfer by releasing the line; otherwise, the
transfer is cancelled, the gateway sends a SIP NOTIFY message with
a failure reason in the NOTIFY body (such as 486 if busy tone
detected), and generates an additional hook-flash towards the FXO
line to restore connection to the original call.
For additional information, refer to the CPE SIP Configuration Guide for
IP Voice Mail.
Note:
Applicable only for FXO interfaces.