AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 80 / 390

SIP User's Manual 80 Document #: LTRT-65409
MediaPack Series
Table 5-8: General Parameters (Protocol Definition)
Parameter Description
Subject
[SIPSubject]
Defines the value of the Subject header in outgoing INVITE messages. If
not specified, the Subject header isn't included (default).
The maximum length of the subject is limited to 50 characters.
Multiple Packetization
Time Format
[MultiPtimeFormat]
Determines whether the 'mptime' attribute is included in the outgoing SDP.
Valid options include:
ƒ
[0]
None = Disabled (default)
ƒ
[1]
PacketCable = includes the mptime attribute in the outgoing SDP --
PacketCable-defined format
The 'mptime' attribute enables the gateway to define a separate
Packetization period for each negotiated coder in the SDP. The 'mptime'
attribute is only included if this parameter is enabled, even if the remote
side includes it in the SDP offer.Upon reception, each coder receives its
'ptime' value in the following precedence:
ƒ
From 'mptime' attribute.
ƒ
From 'ptime' attribute.
ƒ
Default value.
Enable Reason Header
[EnableReasonHeader]
Enables / disables the usage of the SIP Reason header.
ƒ
[0]
Disable.
ƒ
[1]
Enable (default).
Enable Semi-Attended
Transfer
[EnableSemiAttendedTr
ansfer]
Determines the gateway behavior when Transfer is initiated while still in
Alerting state.
Valid options include:
ƒ
[0]
Disable = Send REFER with Replaces (default).
ƒ
[1]
Enable = Send CANCEL, and after a 487 response is received,
send REFER without Replaces.
3xx Behavior
[3xxBehavior]
Determines the gateway's behavior when a 3xx response is received for
an outgoing INVITE request. The gateway can either use the same call
identifiers (CallID, branch, to and from tags) or change them in the new
initiated INVITE.
ƒ
[0]
Forward = Use different call identifiers for a redirected INVITE
message (default).
ƒ
[1]
Redirect = Use the same call identifiers.
Enable P-Charging
Vector
[EnablePChargingVecto
r]
Enables the addition of a P-Charging-Vector header to all outgoing INVITE
messages.
Valid options include:
ƒ
[0]
Disable = Disable (default)
ƒ
[1]
Enable = Enable
Enable VoiceMail URI
[EnableVMURI]
Enables or disables the interworking of target and cause for redirection
from Tel to IP and vice versa, according to RFC 4468.
Valid options include:
ƒ
[0]
Disable = Disable (default).
ƒ
[1]
Enable = Enable