AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 151 / 390

Version 5.2 151 August 2007
SIP User's Manual 5. Web-based Management
2.
In the' Caller ID/Name' field, enter the Caller ID string. The Caller ID string can contain
up to 18 characters. Note that when the FXS gateways receives 'Private' or
'Anonymous' strings in the From header, it doesn't send the calling name or number to
the Caller ID display.
3.
In the 'Presentation' field, select 'Allowed'
[0]
to send the string defined in the 'Caller
ID/Name' field when a Tel-to-IP call is made using this gateway port. Select
'Restricted'
[1]
if you don't want to send this string. (Refer to the note below.)
4.
Repeat steps 2 and 3 for each gateway port.
5.
Click the
Submit
button to save your changes.
6.
To save the changes to flash memory, refer to 'Saving Configuration' on page 238 .
Notes:
•
When the 'Presentation' field is set to 'Restricted', the caller identity is
passed to the remote side using only the P-Asserted-Identity and P-
Preferred-Identity headers (AssertedIdMode).
•
The value of the 'Presentation' field can (optionally) be overridden by
configuring the 'Presentation' parameter in the 'Source Number
Manipulation' table.
•
To maintain backward compatibility, when the strings ‘Private’ or
‘Anonymous’ are set in the Caller ID/Name field, the Caller ID is restricted
and the value in the 'Presentation' field is ignored.
5.5.8.4 Call Forward
The gateway allows you to forward incoming IP Æ Tel calls (using 302 response) based on
the gateway port to which the call is routed (applicable only to FXS gateways).
The 'Call Forwarding Table' screen is applicable only if the Call Forward feature is enabled.
To enable Call Forward, set 'Enable Call Forward' to 'Enable' in the 'Supplementary
Services' screen, or EnableForward = 1 in the
ini
file (refer to 'SIP Configuration
Parameters' on page 279 ).
You can also configure the Call Forward table using the
ini
file parameter FwdInfo (refer to
'Analog Telephony Parameters' on page 294 ).