AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 147 / 390

Version 5.2 147 August 2007
SIP User's Manual 5. Web-based Management
Table 5-24: Hunt Group Settings Parameters
Mode Description
Hunt Group ID
Hunt Group ID to which you want to determine the method in which new calls
are assigned to channels within the Hunt group.
Channel Select
Mode
Method in which new calls are assigned to channels within the Hunt Group
entered in the 'Hunt Group ID' field:
ƒ
By Dest Phone Number = Selects the gateway port according to the called
number (refer to the note below).
ƒ
Cyclic Ascending = Selects the next available channel in an ascending cycle
order. Always select the next higher channel number in the Hunt Group.
When the gateway reaches the highest channel number in the Hunt Group,
it selects the lowest channel number in the Hunt Group and then starts
ascending again (default).
ƒ
Ascending = Selects the lowest available channel. It always starts at the
lowest channel number in the Hunt Group and if that channel is not
available, it selects the next higher channel.
ƒ
Cyclic Descending = Selects the next available channel in descending cycle
order. It always selects the next lower channel number in the Hunt Group.
When the gateway reaches the lowest channel number in the Hunt Group, it
selects the highest channel number in the Hunt Group and then start
descending again.
ƒ
Descending = Selects the highest available channel. It always starts at the
highest channel number in the Hunt Group and if that channel is not
available, selects the next lower channel.
ƒ
Dest Cyclic Ascending = It first selects the gateway port according
to the called number (refer to the note below). If the called number isn't
found, then it selects the next available channel in ascending cyclic order.
Note that if the called number is found, but the port associated with this
number is busy, the call is released.
ƒ
By Source Phone Number = Selects the gateway port according to the
calling number.
ƒ
Trunk Cyclic Ascending = N/A.
Registration Mode
Registration mode for the Hunt Group:
ƒ
Per Endpoint = separate registration for each channel in the Hunt Group.
ƒ
Per Gateway = single registration for the whole Hunt Group (default).
ƒ
Don't Register
Note:
The gateway’s port numbers are defined in the ‘Endpoint Phone Numbers’
table under the ‘Phone Number’ column. For detailed information on the
‘Endpoint Phone Numbers’ table, refer to 'Configuring the Endpoint Phone
Numbers' on page
144 ).