AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 277 / 390

Version 5.2 277 August 2007
SIP User's Manual 6. ini File Configuration
Table 6-5: RADIUS Parameter
ini File Field Name
Web Parameter Name
Valid Range and Description
RadiusLocalCacheMode
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page 197 .
RadiusLocalCacheTimeo
ut
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page
197 .
RadiusVSAVendorID
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page
197 .
RadiusVSAAccessAttribu
te
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page
197 .
6.5.6 SNMP Parameters
Table 6-6: SNMP Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
DisableSNMP
For a description of this parameter, refer to 'Configuring the
Management Settings' on page
208 .
SNMPPort
The device's local UDP port used for SNMP Get/Set commands.
The range is 100 to 3999. The default port is 161.
SNMPTrustedMGR_x
Up to five IP addresses of remote trusted SNMP managers from
which the SNMP agent accepts and processes get and set
requests.
Notes:
ƒ
If no values are assigned to these parameters any manager can
access the device.
ƒ
Trusted managers can work with
all
community strings.
KeepAliveTrapPort
The port to which the keep-alive traps are sent.
The valid range is 0 - 65534. The default is port 162.
SendKeepAliveTrap
When enabled, this parameter invokes the keep-alive trap and
sends it every 9/10 of the time defined in the parameter defining
NAT Binding Default Timeout.
ƒ
[0]
= Disable
ƒ
[1]
= Enable
SNMPSysOid
Defines the base product system OID.
Default is eSNMP_AC_PRODUCT_BASE_OID_D.
SNMPTrapEnterpriseOid
Defines a Trap Enterprise OID.
Default is eSNMP_AC_ENTERPRISE_OID.
The inner shift of the trap in the AcTrap subtree is added to the
end of the OID in this parameter.
acUserInputAlarmDescription
Defines the description of the input alarm.
acUserInputAlarmSeverity
Defines the severity of the input alarm.