AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 316 / 390

SIP User's Manual 316 Document #: LTRT-65409
MediaPack Series
6.5.12 Channel Parameters
The Channel Parameters define the DTMF, fax and modem transfer modes.
Table 6-12: Channel Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
DJBufMinDelay
For a description of this parameter, refer to 'Configuring the RTP /
RTCP Settings' on page
183 .
DJBufOptFactor
For a description of this parameter, refer to 'Configuring the RTP /
RTCP Settings' on page
183 .
AnalogSignalTransportType
For a description of this parameter, refer to 'Configuring the RTP /
RTCP Settings' on page
183 .
FaxTransportMode
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page
179 .
FaxRelayEnhancedRedundanc
yDepth
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page
179 .
FaxRelayRedundancyDepth
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page
179 .
FaxRelayMaxRate
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page
179 .
FaxRelayECMEnable
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page
179 .
FaxModemBypassCoderType
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page 179 .
CNGDetectorMode
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page
179 .
FaxModemBypassM
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page
179 .
FaxBypassPayloadType
For a description of this parameter, refer to 'Configuring the RTP /
RTCP Settings' on page
183 .
CallerIDTransportType
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page
179 .
ModemBypassPayloadType
Modem Bypass dynamic payload type (range 0-127).
The default value is 103.
FaxModemRelayVolume
-18 to -3, corresponding to -18 dBm to -3 dBm in 1 dB steps. The
default is -12 dBm fax gain control.
DetFaxOnAnswerTone
For a description of this parameter, refer to 'General Parameters'
on page
70 .
EchoCancellerAggressiveNLP
Enables or disables the Aggressive NLP at the first 0.5 second of
the call. When enabled, the echo is removed only in the first half a
second of the incoming IP signal.
ƒ
[0]
= Disable (default)
ƒ
[1]
= Enable