AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 272 / 390

SIP User's Manual 272 Document #: LTRT-65409
MediaPack Series
6.5.3 Web and Telnet Parameters
Table 6-3: Web and Telnet Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
WebAccessList_x
Defines up to ten IP addresses that are permitted to access the
gateway's Embedded Web Server and Telnet interfaces. Access from an
undefined IP address is denied. This security feature is inactive (the
gateway can be accessed from any IP address) when the table is empty.
For example:
WebAccessList_0 = 10.13.2.66
WebAccessList_1 = 10.13.77.7
The default value is 0.0.0.0 (the gateway can be accessed from any IP
address).
For defining the Web and Telnet Access list using the Embedded Web
Server, refer to 'Configuring the Web and Telnet Access List' on page
190 .
WebRADIUSLogin
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page
197 .
DisableWebTask
ƒ
[0]
= Enable Web management (default).
ƒ
[1]
= Disable Web management.
ResetWebPassword
Resets the username and password of the primary and secondary
accounts to their defaults.
ƒ
[0]
= Password and username retain their values (default).
ƒ
[1]
= Password and username are reset (for the default username
and password, refer to 'User Accounts' on page 56 ).
Note:
The username and password cannot be reset from the Embedded
Web Server (i.e., via AdminPage or by loading an
ini
file).
WelcomeMessage
Configures the Welcome message that appears after a Embedded Web
Server login.
The format of this
ini
file parameter table is:
[WelcomeMessage ]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text
WelcomeMessage 1 = "..." ;
WelcomeMessage 2 = "..." ;
WelcomeMessage 3 = "..." ;
[\WelcomeMessage]
For Example:
[WelcomeMessage ]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text
WelcomeMessage 1 = "**********************************" ;
WelcomeMessage 2 = "********* This is a Welcome message ***" ;
WelcomeMessage 3 = "**********************************" ;
[\WelcomeMessage]
Notes:
ƒ
Each index represents a line of text in the Welcome message box. Up
to 20 indexes can be defined.
ƒ
If this parameter is not configured, no Welcome message box is
displayed.