AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 290 / 390

SIP User's Manual 290 Document #: LTRT-65409
MediaPack Series
Table 6-7: SIP Configuration Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
ƒ
If the coder G.729 is selected and silence suppression is enabled
(for this coder), the gateway includes the string 'annexb=no' in the
SDP of the relevant SIP messages. If silence suppression is set to
'Enable w/o Adaptations', 'annexb=yes' is included. An exception is
when the remote gateway is a Cisco device (IsCiscoSCEMode).
ƒ
CoderName can appear up to 25 times (five coders in five coder
groups).
IPProfile
Configures the IP profiles table (for Embedded Web Server, refer to 'IP
Profile Settings' on page
142 ).
[IPProfile]
FORMAT IPProfile_Index = IPProfile_
ProfileName
,
IPProfile_
IpPreference
, IPProfile_
CodersGroupID
,
IPProfile_
IsFaxUsed
*, IPProfile_
JitterBufMinDelay
*,
IPProfile_
JitterBufOptFactor
*, IPProfile_
IPDiffServ
*,
IPProfile_
SigIPDiffServ
*, N/A, IPProfile_
RTPRedundancyDepth
,
IPProfile_
RemoteBaseUDPPort
, IPProfile_
CNGmode
,
IPProfile_
VxxTransportType
, IPProfile_
NSEMode
, N/A,
IPProfile_
PlayRBTone2IP
, IPProfile_
EnableEarlyMedia
*,
IPProfile_
ProgressIndicator2IP
*, IPProfile_
ECE
*;
[\IPProfile]
* = Indicates common parameters used in both IP and Tel profiles.
IplPreference = determines the priority of the Profile (1 to 20, where 20
is the highest preference). If both IP and Tel profiles apply to the same
call, the coders and other common parameters (indicated with an
asterisk) of the preferred Profile are applied to that call. If the Tel and IP
profiles are identical, the Tel Profile parameters are applied.
For example:
[IPProfile]
IPProfile_1 = name1,2,1,0,10,13,15,44,1,1,6000,0,2,0,0,0,1,0,1;
IPProfile_2 =
name2,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$;
[\IPProfile]
Notes:
ƒ
For a description of using
ini
file parameter tables, refer to 'Structure
of ini File Parameter Tables' on page 253 .
ƒ
Two adjacent dollar signs ('$$') indicate that the parameter's default
value is used.
ƒ
IPProfile can be used in the Tel to IP Routing and IP to Hunt Group
Routing tables (Prefix and PSTNPrefix parameters).
ƒ
The 'Profile Name' assigned to a Profile index, must enable users to
identify it intuitively and easily.
ƒ
This parameter can appear up to 9 times (i.e., index = 1 to 9).