AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 149 / 390

Version 5.2 149 August 2007
SIP User's Manual 5. Web-based Management
5.5.8.2 Automatic Dialing
The 'Automatic Dialing' screen is used to define telephone numbers that are automatically
dialed when a specific port is used.
You can also configure automatic dialing using the
ini
file parameter TargetOfChannel
(refer to 'Analog Telephony Parameters' on page 294 ).
¾
To configure Automatic Dialing take these 6 steps:
1.
Open the 'Automatic Dialing' screen (
Protocol Management
menu >
Endpoint
Settings
submenu >
Automatic Dialing
option).
Figure 5-29: Automatic Dialing Screen
2.
In the 'Destination Phone Number' field corresponding to a port, enter the telephone
number to dial.
3.
In the 'Auto Dial Status' field, select one of the following:
•
Enable
[1]
: When making a call, the number in the 'Destination Phone Number'
field is automatically dialed if the phone is offhooked (for FXS gateways) or ring
signal is applied to a port (FXO gateways).
•
Disable
[0]
: The automatic dialing option on the specific port is disabled (the
number in the 'Destination Phone Number' field is ignored).
•
Hotline
[2]
: When a phone is offhooked and no digit is dialed for
HotLineToneDuration, the number in the 'Destination Phone Number' field is
automatically dialed (applies to FXS and FXO gateways).
4.
Repeat step 3 for each port you want to use for Automatic Dialing.
5.
Click the
Submit
button to save your changes.
6.
To save the changes to flash memory, refer to 'Saving Configuration' on page 238 .