Version 5.2
263
August 2007
SIP User's Manual
6. ini File Configuration
Table
6-1: Networking Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
PPPoEUserName
User Name for PAP or Host Name for CHAP authentication.
The valid range is a string of up to 47 characters. The default value is 0.
PPPoEPassword
Password for PAP or Secret for CHAP authentication.
The valid range is a string of up to 47 characters. The default value is 0.
PPPoEServerName
Server Name for CHAP authentication.
The valid range is a string of up to 47 characters. The default value is 0.
PPPoEStaticIPAddress
IP address to use in a static configuration setup. If set, used during PPP
negotiation to request this specific IP address from the PPP server. If
approved by the server, this IP address is used during the session.
The valid IP address range is in dotted notation xxx.xxx.xxx.xxx. The
default value is 0.0.0.0.
PPPoERecoverIPAddress
IP address to use when booting from the flash to non-PPPoE (Point-to-
Point Protocol over Ethernet) environments.
The valid IP address range is in dotted notation xxx.xxx.xxx.xxx. The
default value is 10.4.10.4.
PPPoERecoverSubnetMa
sk
Subnet Mask to use when booting from the flash to non-PPPoE (Point-
to-Point Protocol over Ethernet) environments.
The valid IP address range is in dotted notation xxx.xxx.xxx.xxx. The
default value is 255.255.0.0.
PPPoERecoverDfGWAdd
ress
Default Gateway address to use when booting from the flash to non-
PPPoE (Point-to-Point Protocol over Ethernet) environments.
The valid IP address range is in dotted notation xxx.xxx.xxx.xxx. The
default value is 10.4.10.1.
PPPoELCPEchoEnable
Enables or disables the Point-to-Point Protocol over Ethernet (PPPoE)
disconnection auto-detection feature.
[0]
= Disable
[1]
= Enable (default)
By default, the PPPoE Client (i.e., embedded in the gateway) sends LCP
Echo packets to the server to check that the PPPoE connection is open.
Some Access Concentrators (PPPoE servers) don't reply to these LCP
Echo requests, resulting in a disconnection. By disabling the LCP
disconnection auto-detection feature, the PPPoE Client doesn't send
LCP Echo packets to the server (and does not detect PPPoE
disconnections).
Differential Services.
For detailed information on IP QoS via Differentiated Services, refer to 'IP QoS via Differentiated
Services (DiffServ)' on page
372
.
NetworkServiceClassDiff
Serv
For a description of this parameter, refer to 'Configuring the IP Settings'
on page
164
.
PremiumServiceClassMe
diaDiffServ
For a description of this parameter, refer to 'Configuring the IP Settings'
on page
164
.
PremiumServiceClassCo
ntrolDiffServ
For a description of this parameter, refer to 'Configuring the IP Settings'
on page
164
.
Содержание Mediapack mp-11x
