AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 262 / 390

SIP User's Manual 262 Document #: LTRT-65409
MediaPack Series
Table 6-1: Networking Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
VLANBronzeServiceClas
sPriority
For a description of this parameter, refer to 'Configuring the VLAN
Settings' on page
174 .
EnableDNSasOAM
This parameter applies to both Multiple IPs and VLAN mechanisms.
Multiple IPs: Determines the network type for DNS services.
VLAN: Determines the traffic type for DNS services.
ƒ
[1]
= OAM (default)
ƒ
[0]
= Control.
EnableNTPasOAM
This parameter applies to both Multiple IPs and VLAN mechanisms.
Multiple IPs: Determines the network type for NTP services.
VLAN: Determines the traffic type for NTP services.
ƒ
[1]
= OAM (default)
ƒ
[0]
= Control.
VLANSendNonTaggedOn
Native
Specify whether to send non-tagged packets on the native VLAN.
ƒ
[0]
= Sends priority tag packets (default).
ƒ
[1]
= Sends regular packets (with no VLAN tag).
Multiple IPs Parameters
EnableMultipleIPs
For a description of this parameter, refer to 'Configuring the IP Settings'
on page
164 .
LocalMediaIPAddress
For a description of this parameter, refer to 'Configuring the IP Settings'
on page
164 .
LocalMediaSubnetMask
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 164 .
LocalMediaDefaultGW
For a description of this parameter, refer to 'Configuring the IP Settings'
on page
164 .
LocalControlIPAddress
For a description of this parameter, refer to 'Configuring the IP Settings'
on page
164 .
LocalControlSubnetMask
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 164 .
LocalControlDefaultGW
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 164 .
LocalOAMIPAddress
For a description of this parameter, refer to 'Configuring the IP Settings'
on page
164 .
LocalOAMSubnetMask
For a description of this parameter, refer to 'Configuring the IP Settings'
on page
164 .
LocalOAMDefaultGW
For a description of this parameter, refer to 'Configuring the IP Settings'
on page
164 .
PPPoE Parameters
EnablePPPoE
Enables the PPPoE (Point-to-Point Protocol over Ethernet) feature.
ƒ
[0]
= Disable (default)
ƒ
[1]
= Enable