AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 163 / 390

Version 5.2 163 August 2007
SIP User's Manual 5. Web-based Management
Table 5-28: Voice Mail Parameters
Parameter Description
MWI
MWI Off Digit Pattern
[MWIOffCode]
Determines a digit code used by the gateway to notify the PBX that there
aren't any messages waiting for a specific extension. This code is added
as prefix to the dialed number.
The valid range is a 25-character string.
MWI On Digit Pattern
[MWIOnCode]
Determines a digit code used by the gateway to notify the PBX of
messages waiting for a specific extension. This code is added as prefix
to the dialed number.
The valid range is a 25-character string.
MWI Suffix Pattern
[MWISuffixCode]
Determines a digit code used by the gateway as a suffix for MWIOnCode
and MWIOffCode. This suffix is added to the generated DTMF string
after the extension number.
The valid range is a 25-character string.
SMDI
Enable SMDI
[SMDI]
Enables Simplified Message Desk Interface (SMDI) interface on the
gateway.
ƒ
[0] Disable = Normal serial (default).
ƒ
[1] Bellcore
ƒ
[2] Ericsson MD-110
ƒ
[3] NEC (ICS)
Note:
When the RS-232 connection is used for SMDI messages (Serial
SMDI), it cannot be used for other applications, for example, to access
the Command Line Interface.
SMDI Timeout
[SMDITimeOut]
Determines the time (in msec) that the gateway waits for an SMDI Call
Status message before or after a Setup message is received. This
parameter is used to synchronize the SMDI and analogCAS interfaces.
If the timeout expires and only an SMDI message was received, the
SMDI message is dropped. If the timeout expires and only a Setup
message was received, the call is established.
The valid range is 0 to 10000 (10 seconds). The default value is 2000.