AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 31 / 390

Version 5.2 31 August 2007
SIP User's Manual 3. Installing the MediaPack
3.1.3.1 Mounting MP-11x on a Desktop
Attach the four (supplied) anti-slide bumpers to the base of the MP-11x (refer to the figure
item #1 in 'Mounting the MP-11x' on page
30 ) and place it on a desktop in the desired
position.
3.1.3.2 Mounting MP-11x on a Wall
Follow the procedure below for mounting the MP-11x on a wall.
¾
To mount the MP-11x on a wall, take these 4 steps:
1.
Drill four holes according to the following dimensions:
•
Horizontal distance between holes: 140 mm
•
Vertical distance between: 101.4 mm
2.
Insert a wall anchor of the appropriate size into each hole.
3.
Fasten a DIN 96 3.5X20 wood screw (not supplied) into each of the wall anchors.
4.
Position the four oval notches, located on the underside of the MP-11x (refer to item
#2 in 'Mounting the MP-11x' on page
30 ), over the four screws and hang the MP-11x
on them.
3.1.3.3 Installing MP-11x in a 19-inch Rack
The MP-11x can be (optionally) installed in a standard 19-inch rack by placing it on an
AudioCodes' 19-inch rack-mounting shelf (special customer order) that must be pre-
installed in the rack. The shelf can hold up to two MP-11x gateways.
The rack-mounting shelf can be ordered separately from AudioCodes. The 19-inch rack
installation package contains a single shelf (shown in the figure below), and eight shelf-to-
device screws.
Figure 3-2: AudioCodes 19-inch Rack Shelf for MP-11x
Note:
The 19-inch rack shelf is not supplied in the standard package kit, but can be
ordered separately: Bulk Pack package (MCMK00015) containing 10 rack
mounting shelves for MP-11x. For ordering and pricing, please contact your
AudioCodes' distributor.