AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 77 / 390

Version 5.2 77 August 2007
SIP User's Manual 5. Web-based Management
Table 5-8: General Parameters (Protocol Definition)
Parameter Description
Use Source Number as
Display Name
[UseSourceNumberAsD
isplayName]
Applicable to Tel-to-IP calls.
ƒ
[0]
No = The Tel Source Number is used as the IP Source Number and
the Tel Display Name is used as the IP Display Name (if Tel Display
Name is received). If no Display Name is received from the Tel side,
the IP Display Name remains empty (default).
ƒ
[1]
Yes = If a Tel Display Name is received, the Tel Source Number is
used as the IP Source Number and the Tel Display Name is used as
the IP Display Name. If no Display Name is received from the Tel side,
the Tel Source Number is used as the IP Source Number and also as
the IP Display Name.
ƒ
[2]
Overwrite = The Tel Source Number is used as the IP Source
Number and also as the IP Display Name (even if the received Tel
Display Name is not empty).
Use Display Name as
Source Number
[UseDisplayNameAsSo
urceNumber]
Applicable to IP-to-Tel calls.
ƒ
[0]
No = The IP Source Number is used as the Tel Source Number and
the IP Display Name is used as the Tel Display Name (if IP Display
Name is received). If no Display Name is received from IP, the Tel
Display Name remains empty (default).
ƒ
[1]
Yes = If an IP Display Name is received, it is used as the Tel Source
Number and also as the Tel Display Name, the Presentation is set to
Allowed (0). If no Display Name is received from IP, the IP Source
Number is used as the Tel Source Number and the Presentation is set
to Restricted (1).
For example: When the following is received 'from: 100
<sip:200@201.202.203.204>', the outgoing Source Number and Display
Name are set to '100' and the Presentation is set to Allowed (0).
When the following is received 'from: <sip:100@101.102.103.104>', the
outgoing Source Number is set to '100' and the Presentation is set to
Restricted (1).
Play Ringback Tone to IP
[PlayRBTone2IP]
ƒ
[0]
Don't Play = Ringback tone isn't played to the IP side of the call
(default).
ƒ
[1]
Play = Ringback tone is played to the IP side of the call after SIP
183 session progress response is sent (for analog interfaces, this
applies only to FXS modules; in FXO modules the Ringback tone isn't
played).
Notes:
ƒ
To enable the gateway to send a 183/180+SDP responses, set
EnableEarlyMedia to 1.
ƒ
If EnableDigitDelivery = 1, the gateway doesn't play a Ringback tone to
IP and doesn't send 183 or 180+SDP responses.