AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 159 / 390

Version 5.2 159 August 2007
SIP User's Manual 5. Web-based Management
Table 5-27: FXO Parameters
Parameter Description
Disconnect on Dial Tone
[DisconnectOnDialTone
]
FXO modules can disconnect a call after a dial tone from the PBX is
detected.
ƒ
[0]
Disable = Call isn't released.
ƒ
[1]
Enable = Call is released if dial tone is detected on the gateway's
FXO port (default).
Note:
This option is in addition to the mechanism that disconnects a call
when either busy or reorder tones are detected.
Guard Time Between
Calls
[GuardTimeBetweenCal
ls]
Defines the time interval (in seconds) after a call has ended and a new call
can be accepted for IP to Tel calls. This is applicable only to FXO
gateways.
The valid range is 0 to 10. The default value is 1 second.
Note:
Occasionally, after a call is ended and onhook is applied, a delay is
required before placing a new call (and performing offhook). This is
necessary to prevent wrong hook-flash detection or other glare
phenomena.