AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 317 / 390

Version 5.2 317 August 2007
SIP User's Manual 6. ini File Configuration
Table 6-12: Channel Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
FaxModemBypassBasicRTPPa
cketInterval
Determines the basic frame size that is used during fax / modem
bypass sessions.
ƒ
[0]
= Determined internally (default)
ƒ
[1]
= 5 msec (not recommended)
ƒ
[2]
= 10 msec
ƒ
[3]
= 20 msec
Note:
When set for 5 msec (1), the maximum number of
simultaneous channels supported is 120.
FaxModemBypassDJBufMinDe
lay
Determines the Jitter Buffer delay during fax and modem bypass
session.
The range is 0 to 150 msec. The default is 40.
EnableFaxModemInbandNetw
orkDetection
Enables or disables inband network detection related to
fax/modem.
ƒ
[0]
= Disable (default)
ƒ
[1]
= Enable
When this parameter is enabled on Bypass mode
(VxxTransportType = 2), a detection of an Answer Tone from the
network triggers a switch to bypass mode in addition to the local
Fax/Modem tone detections. However, only a high bit-rate coder
voice session effectively detects the Answer Tone sent by a
remote Endpoint. This can be useful when, for example, the
payload of voice and bypass is the same, allowing the originator to
switch to bypass mode as well.