AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 113 / 390

Version 5.2 113 August 2007
SIP User's Manual 5. Web-based Management
Table 5-13: Supplementary Services Parameters
Parameter Description
MWI Display
[MWIDisplay]
ƒ
[0]
Disable = MWI information isn't sent to display (default).
ƒ
[1]
Enable = MWI information is sent to display.
If enabled, the gateway generates an MWI FSK message that is displayed
on the MWI display.
Note:
This parameter is applicable only to FXS modules.
Subscribe to MWI
[EnableMWISubscriptio
n]
ƒ
[0]
Disable = Disable MWI subscription (default).
ƒ
[1]
Enable = Enable subscription to MWI (to MWIServerIP address).
Note:
Use the parameter SubscriptionMode (described in Proxy &
Registration Parameters on page 82 ) to determine whether the gateway
subscribes separately per endpoint of for the entire gateway.
MWI Server IP Address
[MWIServerIP]
MWI server IP address. If provided, the gateway subscribes to this IP
address.
The MWI server address can be configured as a numerical IP address or
as a domain name. If not configured, the Proxy IP address is used instead.
MWI Subscribe
Expiration Time
[MWIExpirationTime]
MWI subscription expiration time in seconds.
The default is 7200 seconds. The range is 10 to 72000.
MWI Subscribe Retry
Time
[SubscribeRetryTime]
Subscription retry time in seconds.
The default is 120 seconds. The range is 10 to 7200.
Stutter Tone Duration
[StutterToneDuration]
Duration (in msec) of the played Stutter dial tone, which indicates that Call
Forwarding is enabled or that there is a waiting message(s).
The default is 2,000 (i.e., 2 seconds). The range is 1,000 to 60,000.
The Stutter tone is played (instead of a regular Dial tone), when a Call
Forward is enabled on the specific port or when MWI is received. The tone
is composed of a Confirmation tone, which is played for a user-defined
duration (StutterToneDuration), followed by a Stutter tone. Both tones are
defined in the CPT file.
Notes:
ƒ
This parameter is applicable only to FXS gateways.
ƒ
The Message Waiting Notification (MWI) tone takes precedence over
the Call Forwarding Reminder tone. For detailed information on
Message Waiting Indication (MWI), refer to Message Waiting Indication
on page
360 .
Conference Parameters
Enable 3-Way
Conference
[Enable3WayConferenc
e]
Enables or disables the 3-Way Conference feature.
Valid options include:
ƒ
[0]
Disable = Disable (default)
ƒ
[1]
Enable = Enables 3-way conferencing
Establish Conference
Code
[ConferenceCode]
Defines the digit pattern that once detected, generates the Conference-
initiating INVITE when Enable3WayConference is set to 1.
The valid range is a 25-character string. The default is “!” (Hook-Flash).