AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 127 / 390

Version 5.2 127 August 2007
SIP User's Manual 5. Web-based Management
5.5.4.1 General Parameters
The
General Parameters
option is used to configure the gateway's IP-to-Tel and Tel-to-IP
routing parameters.
¾
To configure the general routing parameters, take these 4 steps:
1.
Open the 'General Parameters' screen (
Protocol Management
menu >
Routing
Tables
submenu >
General Parameters
option).
Figure 5-20: Routing Tables - General Parameters Screen
2.
Configure the general parameters according to the table below.
3.
Click the
Submit
button to save your changes.
4.
To save the changes to flash memory, refer to 'Saving Configuration' on page 238 .
Table 5-20: General Parameters (Routing Tables)
Parameter Description
Add Trunk Group ID as
Prefix
[AddTrunkGroupAsPref
ix]
ƒ
[0]
No = Don't add hunt group ID as prefix (default).
ƒ
[1]
Yes = Add hunt group ID as prefix to called number.
If enabled, then the gateway's hunt group ID is added as a prefix to the
destination phone number for Tel-to-IP calls.
Notes:
ƒ
This option can be used to define various routing rules.
ƒ
To use this feature, you must configure the hunt group IDs.