AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 133 / 390

Version 5.2 133 August 2007
SIP User's Manual 5. Web-based Management
„ You can configure the 'Hunt Group Settings' table to determine the method in which
new calls are assigned to channels within the Hunt Groups (a different method for
each Hunt Group can be configured). For information on how to enable this option,
refer to 'Configuring the Hunt Group Settings' on page
145
.
If a Channel Select Mode
for a specific Hunt Group isn't specified, then the global Channel Select Mode
parameter (defined in the 'General Parameters' screen under 'Advanced Parameters')
applies.
You can also configure the IP to Hunt Group Routing table using the
ini
file parameter
PSTNPrefix (refer to 'Number Manipulation and Routing Parameters' on page 304 ).
¾
To configure the IP to Hunt Group Routing table, take these 6
steps:
1.
Open the 'IP to Hunt Group Routing' screen (
Protocol Management
menu >
Routing
Tables
submenu >
IP to Hunt Group Routing
option).
Figure 5-21: IP to Hunt Group Routing Table Screen
2.
From the 'IP to Tel Routing Mode' field, select the IP to Tel routing mode (refer to the
table below).
3.
From the 'Routing Index' drop-down list, select the range of entries that you want to
add. Up to 24 entries can be configured.
4.
Configure the 'IP to Hunt Group Routing' table according to the table below.
5.
Click the
Submit
button to save your changes.
6.
To save the changes so they are available after a power fail, refer to 'Saving
Configuration' on page
238 .