AudioCodes Mediapack mp-11x, Руководство пользователя

Страница: 105 / 390

Version 5.2 105 August 2007
SIP User's Manual 5. Web-based Management
Table 5-12: General Parameters (Advanced Parameters)
Parameter Description
CDR and Debug
CDR Server IP Address
[CDRSyslogServerIP]
Defines the destination IP address for CDR logs.
The default value is a null string that causes the CDR messages to be
sent with all Syslog messages.
Note:
The CDR messages are sent to UDP port 514 (default Syslog
port).
CDR Report Level
[CDRReportLevel]
Determines whether or not CDRs are sent to the Syslog server, and if
enabled, at which events they are sent.
Valid options include:
ƒ
[0]
None = Call Detail Record (CDR) is not used
ƒ
[1]
End Call = CDR is sent to the Syslog server at the end of each
call.
ƒ
[2]
Start & End Call = CDR report is sent to Syslog at the start and
end of each call.
ƒ
[3]
Connect & End Call = CDR report is sent to Syslog at connection
and at the end of each call.
ƒ
[4]
Start & Connect & End Call = CDR report is sent to Syslog at the
start, at connection, and at the end of each call.
The CDR Syslog message complies with RFC 3161 and is identified by:
Facility = 17 (local1) and Severity = 6 (Informational).
Debug Level
[GwDebugLevel]
Syslog logging level. One of the following debug levels can be selected:
ƒ
[0]
0 = Debug is disabled (default)
ƒ
[1]
1 = Flow debugging is enabled
ƒ
[2]
2 = Flow and device interface debugging are enabled
ƒ
[3]
3 = Flow, device interface and stack interface debugging are
enabled
ƒ
[4]
4 = Flow, device interface, stack interface and session manager
debugging are enabled
ƒ
[5]
5 = Flow, device interface, stack interface, session manager and
device interface expanded debugging are enabled.
Note:
Usually set to 5 if debug traces are needed.