6-6
CD016
20. Free the differential assembly from the frame
mountings; then shift the differential assembly for-
ward enough to disengage the front driveshaft
from the output yoke.
KX161
21. Place the differential on its right side; then remove
it from the frame.
KX159
Disassembling Input Shaft
NOTE: This procedure can be performed on a
rear gear case; however, some components may
vary. The technician should use discretion and
sound judgment.
1. Using a T-40 torx wrench, remove the cap screws
securing the pinion housing.
CD102
2. Using a rubber mallet, remove the housing.
Account for a gasket. Remove the fork, collar, and
spring. Note the location of all the components for
assembling purposes.
CD103
CD106
3. Using a boot-clamp pliers (or suitable substitute),
remove the boot clamps; then remove the boots
and splined drive from the input shaft.
4. Remove the input shaft from the pinion housing.
Next
Back
Section
Table of Contents
Manual
Table of Contents
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
