6-4
2. Remove the drain plug and drain the gear lubricant
into a drain pan; then reinstall the plug and tighten
to 45 in.-lb.
ATV0082A
3. Remove the front wheels.
4. Pump up the hand brake; then engage the brake
lever lock.
5. Remove the cotter pin securing the hex nut; then
remove the hex nut and washer.
KX041
6. Release the brake lever lock.
NOTE: It is not necessary to remove the brake
hoses from the calipers for this procedure.
7. Remove the two brake calipers. Account for the
four cap screws.
AF894D
8. Remove the tie rod cotter pins and discard the
pins.
AF895D
9. Remove the tie rod lock nuts.
AF896D
10. Remove the upper ball joint cap screws taking care
not to strip the threads on the ball joint shaft; then
using a rubber mallet, tap the end of the axle and
free it from the knuckle assembly.
AF628D
11. Pull the steering knuckle away from the axle.
Next
Back
Section
Table of Contents
Manual
Table of Contents
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
