AMX Endeleo Multi-Format Receiver UDM-RX02, Руководство по эксплуатации/справочник

Страница: 99 / 108

UDM-0102 Control Protocol
85 UDM-0102 and UDM-RX02 Operation/Reference Guide
The status value returned is as follows:
Command Summary
Basic Commands
Input Numbering
The UDM has a flexible architecture to maximise use of the available matrix. The UDM1604 is a 16 output
port Hub, with four analog input ports and four TVM input ports. Each analog input port can be used for a
variety of input types, VGA, S-Video, component and composite, and input ports are specified by a main
number, together with a sub input number if the input can be split
The Input number is specified as follows
If the Input is of type 1 (composite) then the Sub input field (with values 1,2,3) can further specify which of
the three composite inputs on an Input to use for this connection.
Input A would come from the 'A' labelled VGA connector.
Port Numbering
There is a single output port, numbered 1.
Status value Description
1 Command completed successfully
70 System is already logged out
UDP
Command 0 1 2 3 4 5 6
Connect 1 X Port Input Sub input Video input type
Disconnect 6 X Port
Connect video 11 X Port Input Sub input Video input type
Disconnect video 16 X Port
Connect audio 21 X Port Input Audio input type
Disconnect audio 26 X Port
Query port 12 X Port
Get port or input name 79 X Port Sub port Type
Get receiver info 88 X Port
Send remote command 87 X Port Remote command Remote parameters
Get remote serial buffer 89 X Port Terminator
Enable/disable UDP
key messages 93 X Port Enable/disable
Set Hub ID 67 X Length of ID string Start of string (data)
Get Hub or port ID 78 X Port
Reset 99 X 156
Value Description
1 Input A
2 Input B