AMX Endeleo Multi-Format Receiver UDM-RX02, Руководство по эксплуатации/справочник

Страница: 104 / 108

UDM-0102 Control Protocol
90 UDM-0102 and UDM-RX02 Operation/Reference Guide
Send Non-Specific Serial Command
Sends a serial string to the serial output (if present) on the remote receiver. This allows direct control of the
serial output (independent of the device protocol loaded in the receiver).
It is preferred that serial control be accomplished by loading the appropriate driver file into a receiver and
using the generic control commands (this allows the same command to be issued to a variety of different
devices, for example), but this command can be used for more direct control if required.
Set Serial Parameters
Sets serial port parameters for use with direct serial string transmission.
The serial parameter code is defined as follows:
Byte # 4 5...n
Byte value 3 Serial string for onward transmission
Byte # 4 5 6 7
Byte value 10 Serial parameter code User defined User defined
Serial parameter code Description
112 1200 baud
113 2400 baud
114 4800 baud
115 9600 baud
116 1200 baud odd parity
117 2400 baud odd parity
118 4800 baud odd parity
119 9600 baud odd parity
120 1200 baud even parity
121 2400 baud even parity
122 4800 baud even parity
123 9600 baud even parity
128 19200 baud
129 38400 baud
130 57600 baud
131 115200 baud
132 19200 baud odd parity
133 38400 baud odd parity
134 57600 baud odd parity
135 115200 baud odd parity
136 19200 baud even parity
137 38400 baud even parity
138 57600 baud even parity
139 115200 baud even parity