AMX Endeleo Multi-Format Receiver UDM-RX02, Руководство по эксплуатации/справочник

Страница: 103 / 108

UDM-0102 Control Protocol
89 UDM-0102 and UDM-RX02 Operation/Reference Guide
Set Remote Control Receiver Protocol
Sets the control protocol being used by the remote control handset.
The following table provides a list of supported handset protocols and their default addresses:
Send Control Operation To Connected Device
Sends a control command out through the IR blaster or serial port connected to the remote receiver. This is
translated in the receiver to the appropriate control protocol previously selected. The receiver must already be
loaded with the right driver for the codes used, and the device being controlled must allow the necessary
actions.
Device control codes are defined as follows:
Byte # 4 5 6
Byte value 1 Remote control protocol Device address for remote
IR protocol Description Default handset address
3 UDM-RC02 110
4 Sky 1
5 Sky+ 1
6 Tivo 5
7 DirecTV 1
8 AMX Endeleo RC03 58
Byte # 4 5
Byte value 2 IR code
IR code Description IR code Description
0-9 Keys 0 to 9 57 Info
10 Channel up 58 Help
11 Channel down 59 Teletext
12 Power off 60 Services
13 Mute 61 Box office
14 Volume up 62 Interactive
15 Volume down 63 TV guide
16 Program up 64 Red
17 Program down 65 Green
18 10+ key (for two digit channel entry) 66 Blue
20 Channel restore (back) 67 Yellow
21 Power up 70 Play
22 Unmute 71 Pause
30 A/V select 1 72 Stop
31 A/V select 2 73 Record
32 A/V select 3 74 Fast forward
40 Device select (DVD/VCR) 75 Rewind
50 Menu 90 Custom 1... through to
51 Select Function 99 Custom 10
52 Cursor up 128 Select composite input
53 Cursor down 136 Select VGA input
54 Cursor left 144 Select S-Video input
55 Cursor right 152 Select Component (YPbPr) input
56 Esc